WAGE & HOUR | 2026-11-11
Donning and Doffing Protective Gear as Compensable Time in California (2026)
Time spent putting on and taking off employer-required protective gear is often paid working time under California's broad control test.
By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published
If your employer requires you to put on protective gear, change into a uniform, or go through a security screening before or after your shift, that time may be compensable under California law. California measures working time more broadly than federal law, treating all time the employee is subject
Why donning and doffing can be paid time in California
Many California employees are required to put on specialized clothing or protective equipment before they can start work and to remove and store it when the shift ends. Food-processing workers suit up in sanitary gear, construction and industrial workers put on hard hats, respirators, and harnesses, laboratory and health-care workers don gowns and masks, and warehouse and retail employees change into required uniforms. The common question is simple to ask and frequently misunderstood: does the clock start when the worker arrives, or only when the worker is fully suited and standing at the station?
Under California law, the answer often is that the clock should start earlier than employers assume. California defines compensable hours worked more broadly than the federal Fair Labor Standards Act, and that difference decides many donning and doffing disputes in the employee's favor.
California's control test for hours worked
The foundation of California wage law is the definition of hours worked found in the Industrial Welfare Commission (IWC) Wage Orders. The Wage Orders define hours worked as the time during which an employee is subject to the control of an employer, and it includes all the time the employee is suffered or permitted to work, whether or not required to do so. That is two independent tests joined by the word and: time under the employer's control is compensable, and time the employee is suffered or permitted to work is compensable, even if the employer did not formally require it.
The control prong is what makes donning and doffing compensable in so many California workplaces. When an employer requires an activity to be performed on its premises, under its rules, before the employee may begin productive work, the employee is subject to the employer's control during that activity. The activity need not be the core job task to count; it need only be something the employer mandates and controls.
Frlekin v. Apple and the reach of the control test
The California Supreme Court applied the control prong decisively in Frlekin v. Apple Inc. (2020) 8 Cal.5th 1038. Apple required retail employees to undergo mandatory bag and package searches before leaving the store, including at the end of a shift and during meal breaks. Apple did not pay for the time employees spent waiting for and submitting to these searches, arguing the searches were off-the-clock and optional because an employee could choose not to bring a bag.
The Supreme Court rejected that argument. It held that the time employees spent on the premises waiting for and undergoing the required exit searches was compensable as hours worked because the employees were subject to Apple's control: the searches were mandatory, occurred on Apple's premises, and were enforced through the threat of discipline. The Court also made clear that an activity does not become non-compensable simply because the employee could theoretically avoid it by, for example, not bringing a bag. The lesson of Frlekin reaches well beyond bag checks. Any mandatory, employer-controlled, on-premises activity, including donning and doffing required gear, is a strong candidate for compensable time.
The integral-and-indispensable principle
Donning and doffing is most clearly compensable when the gear is integral and indispensable to the job and the employer requires it to be put on at work. If a worker cannot safely or lawfully perform the job without the protective equipment, and the employer requires that the equipment be donned on-site, the donning time is part of the controlled, required work process. Protective clothing dictated by safety regulations or by the employer's own rules, changed on the premises, generally falls on the compensable side of the line.
By contrast, where gear is genuinely optional, can be put on at home, and the employer exercises no control over when or where the employee dons it, the analysis is different. The decisive questions are whether the employer requires the activity and whether the employee is under the employer's control while performing it.
California rejects the broad federal de minimis rule
Employers often argue that donning and doffing takes only a few minutes and is too trivial to pay, invoking the federal de minimis doctrine. California has largely closed that door. In Troester v. Starbucks Corp. (2018) 5 Cal.4th 829, the California Supreme Court held that the federal de minimis doctrine does not apply to the California wage claims at issue, where an employee was regularly required to work several minutes off the clock after closing the store. The Court reasoned that California's wage laws are more protective and that employers must pay for small amounts of regularly occurring work time.
Troester acknowledged there may be rare circumstances where recording tiny, irregular increments is impractical, but it emphasized that modern timekeeping technology makes it feasible to capture most work time, and that employers bear the burden of compensating for regularly incurred minutes. For donning and doffing that happens every shift, Troester means the few minutes per day add up to compensable time the employer must pay.
Morillion and employer-controlled activity
The control principle also appears in Morillion v. Royal Packing Co. (2000) 22 Cal.4th 575, where the California Supreme Court held that time agricultural employees spent riding employer-mandated buses to the fields was compensable because the employees were subject to the employer's control during the commute. The employer required the workers to meet at a departure point and prohibited them from using their own transportation. Morillion confirms that when an employer compels an activity and controls the employee during it, the time is hours worked, even if the employee is not performing the core productive task.
Applied to donning and doffing, Morillion reinforces that the question is control, not productivity. An employee suiting up in required gear at a station the employer designates, under rules the employer sets, is under the employer's control just as surely as a worker riding a mandatory bus.
How donning and doffing claims are calculated
When pre-shift and post-shift activities are compensable but unpaid, the unpaid minutes are added to the employee's working time. If the added time pushes the employee over eight hours in a day or forty hours in a week, overtime at one and one-half times the regular rate may be owed; double time can apply beyond twelve hours in a day under the Wage Orders. The recovery vehicle is Labor Code § 1194, which allows an employee paid less than the legal minimum wage or overtime to recover the full unpaid balance, interest, and reasonable attorney's fees and costs.
Unpaid donning and doffing time also often produces derivative violations. Wage statements that omit the time are inaccurate under Labor Code § 226, and employees separated without full payment of all time worked may be owed waiting-time penalties under Labor Code § 203. A few unpaid minutes each shift, multiplied across a workforce and a limitations period, can represent a substantial sum.
Employer defenses and how they fare
Employers commonly argue that the gear is optional, that the activity happens off the clock by the employee's choice, or that the time is de minimis. After Frlekin and Troester, these defenses are weaker than employers hope. Optionality does not defeat a claim where the employer still controls the employee during the activity, and de minimis has little traction for regularly occurring time. A more serious defense is a genuine factual dispute about whether the employer actually required the gear to be donned on-site and controlled the process; where the employer truly leaves timing and location to the employee, the time may not be compensable.
Employers also sometimes rely on rounding policies or on the argument that the employee could have clocked in earlier. Rounding policies are permissible only if they are neutral and do not systematically undercompensate employees over time, and the suffered-or-permitted language of the Wage Orders can capture work the employer knew or should have known was occurring.
Practical steps for employees
If you suspect you are not being paid for required gear or screenings, start by noting when your required activities begin relative to when your time is recorded. Keep a simple log of the gear you must put on, where you put it on, and how long it takes, along with any instruction from a supervisor that it must be done before clocking in. Save schedules, handbooks, or safety rules that require the equipment. Coworkers performing the same routine can corroborate the pattern, which matters because these claims are often suited to group treatment.
For a related look at how California treats mandatory rest time and premium pay, see our discussion of recovery-period premiums and heat-illness protection, which turns on the same principle that employer-controlled time must be respected and paid.
Deadlines and getting help
California wage claims generally carry a three-year statute of limitations, extendable to four years when pursued as an unfair business practice under Business and Professions Code § 17200. Because the amounts accrue minute by minute and evidence such as timekeeping records is in the employer's hands, acting promptly protects your recovery. The ongoing coverage on our employment-law news page follows wage-and-hour developments that affect these claims.
The continuous-workday doctrine
Once compensable activity begins, California applies a continuous-workday principle that can sweep in time between the first and last compensable tasks. If donning required gear is the first principal activity of the day and doffing is the last, the time in between that would otherwise be non-working can become compensable because the workday has started. This matters where an employer requires employees to suit up, then walk to a distant station, then begin production. The walking time that follows a compensable donning activity, on the employer's premises and under its control, is often itself part of the paid workday rather than an unpaid commute.
The continuous-workday framing turns the donning question into more than a few minutes of suiting up. It can affect how the entire pre-production and post-production routine is treated, because the clock, once properly started, does not pause for employer-controlled transitions between required activities.
Security screenings and waiting time
Frlekin v. Apple concerned exit searches, and its reasoning applies squarely to the waiting time that screenings generate. In many warehouses and retail operations, employees must line up and wait to be screened at the end of a shift or before and after meal periods. That waiting time, spent on the premises under the employer's control and subject to discipline for leaving, is compensable under the control test. Employers sometimes argue the wait is brief or that staffing choices, not the policy, cause the delay, but the controlling fact is that the employer requires the employee to remain and submit.
When screening and donning routines bracket a meal period, a further problem arises. California requires a duty-free thirty-minute meal period, and time spent waiting for or undergoing a required screening before the employee can leave can eat into or interrupt that period, potentially converting it into an on-duty or short meal that triggers premium pay under Labor Code § 226.7.
Gear, uniforms, and expense reimbursement
Compensable time is only one dimension of a gear dispute. California also requires employers to bear the cost of required tools and equipment and to reimburse necessary business expenses. Labor Code § 2802 obligates an employer to indemnify an employee for all necessary expenditures incurred in direct consequence of the discharge of duties. Where an employer requires specialized protective gear or a particular uniform, the cost of acquiring and maintaining it can fall on the employer under § 2802 and the Wage Orders, rather than on the worker.
The Wage Orders separately address uniforms, generally requiring the employer to provide and maintain required uniforms. So a single set of facts, mandatory gear donned on-site, can generate layered claims: unpaid compensable time for donning and doffing under § 1194, and unreimbursed expense or uniform-maintenance liability under § 2802 and the Wage Orders. Workers evaluating a gear policy should consider both the time and the cost dimensions.
The employer's recordkeeping burden
A recurring theme in wage litigation is that the employer, not the worker, bears the duty to keep accurate records of hours worked. Labor Code § 1174 requires employers to keep payroll records showing the hours worked daily by, and the wages paid to, employees. When an employer fails to record donning and doffing time, it cannot then use the absence of records to defeat the claim. California follows the principle that where the employer has failed to keep accurate records, an employee may meet the burden of proving uncompensated work by producing sufficient evidence to show the amount and extent of that work as a matter of just and reasonable inference, and the burden then shifts to the employer to come forward with evidence of the precise amount of work performed or to negate the inference.
This burden-shifting is powerful for employees. It means that reasonable estimates, corroborated by coworkers and by the routine nature of the required gear, can support a recovery even without a precise clock entry for each day's suiting up.
Group treatment of donning and doffing claims
Because donning and doffing routines are typically uniform across a workforce, imposed by a single policy that applies to everyone in a role, these claims often lend themselves to class or representative treatment. When the employer requires the same gear, at the same place, under the same rules, the central question, whether that time is compensable, is common to all affected employees. That commonality can support class certification, and it can support a representative action for civil penalties under the Private Attorneys General Act, Labor Code § 2698 and following, which allows an aggrieved employee to recover penalties for Labor Code violations on behalf of the state and other employees.
For an individual worker, the practical implication is that a few minutes of unpaid time each shift, which might seem too small to pursue alone, can be meaningful when the same violation affects an entire crew or store over the full limitations period.
A worked example
Consider a food-processing employee required to arrive, clock in only after donning a sanitary smock, hairnet, boots, and gloves at a designated gowning room, walk to the line, and reverse the process at the end of the shift. Suppose the uncompensated donning and doffing totals fifteen minutes per day across a five-day week. That is roughly one and one-quarter hours of unpaid time per week. Over a three-year limitations period, the unpaid straight-time alone is substantial, and if any of that time pushes the employee past eight hours in a day or forty in a week, the overtime premium under the Wage Orders increases the figure. Add potential § 203 waiting-time penalties for separated employees and § 226 wage-statement penalties, and the per-employee exposure grows well beyond the face value of fifteen minutes.
This arithmetic is why employers who shave minutes at the start and end of shifts face significant liability, and why workers should not dismiss small daily increments as not worth pursuing.
Rounding, grace periods, and clock-in rules
Employers sometimes try to manage donning and doffing time through timekeeping rules rather than by paying for it outright. A common tactic is a policy that prohibits clocking in until the employee is fully suited and at the station, which effectively shifts the donning time off the clock. Another is a rounding policy that rounds time punches to the nearest increment. California permits neutral rounding only if, over time, it does not systematically undercompensate employees, and a policy that consistently captures the employee's late clock-out but not the earlier compensable activity is not neutral. A rule that forbids clocking in until after required, controlled donning has occurred does not change the legal character of that time; the activity remains compensable even if the timekeeping system was configured to ignore it.
Grace periods and unpaid pre-shift windows deserve the same scrutiny. If the employer knows or should know that employees are performing required, controlled activities during a supposed grace period, the suffered-or-permitted standard of the Wage Orders can render that time compensable regardless of the label the employer attaches to it. The substance of the control, not the configuration of the time clock, controls the analysis.
Talk to a California employment lawyer. If you are required to put on protective gear, change uniforms, or pass through screenings without pay, you may be owed wages, overtime, penalties, and interest. The attorneys at Trembach Law Firm apply California's control test to recover the time your employer should have paid. Call (213) 645-2246 for a consultation.
Frequently Asked Questions
Is the time I spend putting on required safety gear always paid?
Not always, but often. Under the Wage Orders and Frlekin v. Apple (2020), time is compensable when you are subject to the employer's control. If the employer requires you to don the gear on its premises before work begins, that time is generally hours worked and must be paid.
My employer says a few minutes is too small to pay. Is that right?
Generally no. In Troester v. Starbucks (2018), the California Supreme Court held that the federal de minimis doctrine does not excuse paying for small amounts of regularly occurring work time. Minutes that recur every shift add up and must be paid.
What if I could technically avoid the activity, like not bringing a bag?
Frlekin rejected that logic. The Court held that an activity does not become non-compensable just because the employee could theoretically avoid it. What matters is whether the employer controls you while the required activity occurs.
How do I recover unpaid donning and doffing time?
Labor Code § 1194 lets you recover unpaid minimum wages and overtime, plus interest and attorney's fees. Unpaid time can also trigger inaccurate-wage-statement penalties under § 226 and waiting-time penalties under § 203 if you have separated.
Does this apply if I change into a uniform rather than safety gear?
It can. The question is control, not the label on the clothing. If the employer requires you to change into a uniform on its premises before clocking in and controls that process, the time may be compensable under the same principles.
This article is provided for general informational purposes only and is not legal advice. Reading it does not create an attorney-client relationship. Every case depends on its own facts, and no particular outcome is guaranteed.
Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.
Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301