CUSTOMS COMPLIANCE | 2026-11-21
ISPM-15 Wood Packaging Material Rules for California Importers: Heat Treatment, the IPPC Mark, and Avoiding Re-Export or Destruction
What ISPM-15 requires for pallets, crates, and dunnage, how APHIS and CBP enforce the wood-packaging standard at the border, which materials are exempt, and what happens when a shipment arrives with non-compliant or pest-infested wood
By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published
A California importer's container arrives at the Port of Los Angeles, and the goods inside are perfectly compliant — but the wooden pallets and crates they are packed on are not. The wood lacks the required international treatment mark, or a live wood-boring pest is found during inspection. Within...
What ISPM-15 Is and Why It Exists
ISPM-15 — International Standard for Phytosanitary Measures No. 15, titled "Regulation of Wood Packaging Material in International Trade" — is a standard adopted under the International Plant Protection Convention (IPPC) to prevent the international spread of pests carried in wood packaging material. Raw, untreated wood used to make pallets, crates, and dunnage can contain the larvae and eggs of wood-boring insects — beetles, borers, and other pests — that are capable of devastating forests and agricultural resources when introduced into a new environment. Because wood packaging accompanies virtually every kind of cargo and moves constantly between countries, it is a major pathway for pest introduction. ISPM-15 addresses this risk by requiring that regulated wood packaging be treated to kill pests and marked with an internationally recognized stamp certifying the treatment, so that inspectors anywhere in the world can verify compliance. More than 180 countries, including the United States, participate in the ISPM-15 framework. The standard applies to coniferous and non-coniferous (softwood and hardwood) raw wood packaging; it does not apply to processed wood products that have been manufactured in a way that eliminates pest risk. For a California importer, ISPM-15 is a condition of entry: wood packaging that does not meet the standard is not admissible, and the consequences of non-compliance fall on the shipment and the importer, not on the foreign supplier who provided the wood.
Treatment and the IPPC Mark
ISPM-15 requires that regulated wood packaging undergo an approved phytosanitary treatment and bear the official IPPC mark. The two approved treatments are: heat treatment (HT) — heating the wood to a minimum core temperature of 56 degrees Celsius for at least 30 minutes (or an approved equivalent such as dielectric heating) — and fumigation with methyl bromide (MB), though the use of methyl bromide has been increasingly restricted for environmental reasons. After treatment, the wood is stamped with the IPPC mark, which consists of the IPPC symbol (often called the "wheat stalk" logo), a two-letter country code, a unique facility or producer number assigned by the national plant protection organization, and a treatment code (HT for heat treatment, MB for methyl bromide, and DH for dielectric heating). The mark certifies that the specific piece of wood packaging was treated by an authorized facility. Critically, the treatment and mark apply to the wood packaging itself — each pallet, crate, or piece of dunnage — not to the cargo. The mark must be legible, permanent, and visible, typically on at least two opposite sides of the item. Wood packaging that is treated but not properly marked, or marked without having been treated, is non-compliant. Because the mark is the only practical way for an inspector to verify compliance at the border, a missing, illegible, or fraudulent mark will be treated as a violation regardless of whether the wood was in fact treated.
How the United States Implements and Enforces ISPM-15
The United States implements ISPM-15 through regulations of the Animal and Plant Health Inspection Service (APHIS) at 7 C.F.R. § 319.40, which govern the importation of wood packaging material and incorporate the ISPM-15 treatment and marking requirements. Customs and Border Protection (CBP) enforces these requirements at the port of entry, inspecting shipments for compliant WPM and for the presence of pests. When CBP or APHIS finds non-compliant wood packaging — wood lacking the required IPPC mark, bearing a fraudulent mark, or found to contain a live pest — it can take immediate enforcement action. Under the regulations, non-compliant wood packaging (and, in pest cases, potentially the associated cargo) must be immediately re-exported or, in some cases, destroyed; there is generally no option to treat or remark the wood after arrival in the United States. CBP issues an Emergency Action Notification (EAN) directing the responsible party to re-export or destroy the non-compliant material under CBP and APHIS supervision, at the importer's expense. Repeated or egregious violations can lead to additional consequences, and CBP has authority to assess penalties for violations under its general enforcement statutes, including 19 U.S.C. § 1595a for merchandise introduced contrary to law. The enforcement posture is strict because the risk — introducing a forest-destroying pest — is irreversible, so the agencies prioritize keeping non-compliant wood out rather than allowing remediation after entry.
What Counts as Regulated Wood Packaging — and What Is Exempt
ISPM-15 applies to wood packaging material made of raw (solid) wood used to support, protect, or carry goods, including pallets, crates, boxes, skids, dunnage, blocking, bracing, pallet collars, and spools. It applies regardless of the country of origin of the wood. Several categories are exempt because they have been processed in a way that eliminates pest risk or are too thin to harbor pests: manufactured wood products such as plywood, oriented strand board (OSB), particleboard, and veneer, which are made using heat, pressure, and glue; wood packaging made entirely of processed wood-based materials; wood components 6 millimeters or less in thickness; sawdust, wood wool, and shavings; and certain wholly manufactured items. Loose wood packaging and dunnage used to secure cargo inside a container are not exempt and must be compliant. The distinction matters: an importer who assumes that plywood crates and solid-wood pallets are treated the same will be surprised, because the solid-wood pallet must bear the IPPC mark while the plywood crate need not. Determining whether a particular piece of packaging is regulated or exempt — and ensuring that all regulated pieces are properly treated and marked — is a core part of WPM compliance, and the analysis must cover every piece of wood in the shipment, including dunnage that is easy to overlook.
Pests, Interceptions, and the "Live Pest" Rule
Beyond the treatment-and-mark requirement, ISPM-15 enforcement is driven by the discovery of live pests. Even wood packaging that bears a valid IPPC mark can be found to contain a live wood-boring pest on inspection — because treatment can fail, because the wood was reinfested after treatment, or because of fraud. When CBP or APHIS intercepts a live pest in wood packaging, the agencies treat it as a serious phytosanitary threat and can order re-export or destruction of the wood packaging and take action regarding the cargo, issuing an EAN and, where warranted, reporting the interception to the exporting country. A pest interception can occur regardless of the mark, which is why compliance is not merely a documentation exercise: the wood must actually be free of live pests. Interceptions of high-risk pests like the Asian longhorned beetle have historically driven the entire ISPM-15 framework. For importers, the practical implication is that sourcing wood packaging from suppliers with reliable treatment practices and pest-free storage is essential, because a valid-looking mark on infested wood will not prevent enforcement — and the importer, as the party bringing the goods into the country, bears the cost and consequences of an interception even though the infested wood came from a foreign supplier.
Who Is Responsible and What the Consequences Are
A recurring surprise for importers is that responsibility for WPM compliance falls on the importer and other U.S. parties, even though the wood packaging is almost always provided by the foreign supplier or shipper. CBP directs its enforcement at the party responsible for the shipment in the United States, and the costs of re-export or destruction — including handling, transportation, storage, and disposal — are borne by that party. The consequences of a WPM violation include: delay while the non-compliant wood is segregated and re-exported or destroyed; the cost of that process; potential damage or loss to time-sensitive cargo; disruption of the supply chain; and, for repeated or serious violations, monetary penalties. Because the non-compliant wood often cannot be separated from the cargo without unloading the container, a single untreated pallet can hold up an entire shipment. CBP also tracks violations, and a history of WPM non-compliance can increase scrutiny of an importer's future shipments. The allocation of responsibility means that an importer cannot simply rely on the supplier's assurances; the importer must build WPM compliance into its purchase terms, supplier selection, and inspection practices, because the legal and financial consequences of a violation land on the importer regardless of who provided the wood.
Building a WPM Compliance Program
Because WPM non-compliance cannot be fixed after arrival and the consequences fall on the importer, the practical defense is a compliance program that prevents violations before goods ship. Key elements include: contractual requirements in supplier and shipping agreements that all wood packaging comply with ISPM-15, be properly treated and marked, and be free of pests, with indemnification for violations; supplier qualification that favors shippers with reliable treatment and pest-management practices; pre-shipment verification that wood packaging bears a legible, valid IPPC mark; attention to dunnage and bracing, which are frequently overlooked but must also be compliant; and recordkeeping documenting the compliance measures taken. Importers should also understand the country-specific implementation details, since exporting countries authorize their own treatment facilities and marking, and be alert to fraudulent marks, which have been a recurring problem. When a shipment is destined for the United States, the importer should confirm that the packaging meets the APHIS 7 C.F.R. § 319.40 requirements and that the supplier has a track record of compliance. A well-designed program reduces the risk of an Emergency Action Notification, the cost of re-export or destruction, and the delay and disruption that a WPM violation causes — and positions the importer to respond effectively if a problem nonetheless arises at the border. Importers should also pay attention to the mode of transport and the trans-shipment history of their cargo, because wood packaging that passed inspection in one country can still be rejected in the United States if it does not bear a valid IPPC mark, and dunnage added at an intermediate port is easy to overlook. Where an importer uses the same suppliers repeatedly, it is worth auditing a sample of inbound wood packaging to confirm that the treatment marks are legible and authentic and that the suppliers are using authorized treatment facilities. For high-volume importers, the cost of a single rejected container — the segregation, re-export, demurrage, and lost sales — typically dwarfs the modest cost of verifying compliance in advance, which is why experienced importers treat wood packaging compliance as a standing part of their import-operations checklist rather than an afterthought.
Responding to an Emergency Action Notification
When CBP or APHIS finds non-compliant wood packaging or a live pest, the importer typically receives an Emergency Action Notification (EAN) directing the re-export or destruction of the non-compliant material under agency supervision. The importer must act promptly to comply, because the shipment will not be released until the non-compliant wood is dealt with. In practice, options may include re-exporting the non-compliant wood packaging (and potentially the cargo, depending on whether they can be separated), or destroying the wood under CBP/APHIS supervision, in each case at the importer's expense. Where the cargo can be separated from the non-compliant wood without releasing a pest, the agencies may permit the cargo to be unloaded and the wood dealt with separately — but this is at the agencies' discretion and depends on the circumstances, particularly whether a live pest is involved. The importer should also consider whether the violation exposes it to penalties and whether it has recourse against the supplier under its contracts. Handling an EAN effectively means understanding the agencies' requirements, minimizing the delay and cost, protecting the cargo where possible, and preserving the importer's rights against the party that provided the non-compliant wood. Prompt, informed action can significantly reduce the impact of a WPM violation on the shipment and the importer's business.
Frequently Asked Questions
What is ISPM-15?
ISPM-15 is the International Standard for Phytosanitary Measures No. 15, adopted under the International Plant Protection Convention. It requires that wood packaging material — pallets, crates, dunnage — used in international trade be treated to kill pests and marked with the IPPC mark certifying the treatment, to prevent the spread of destructive wood-boring pests.
What treatments does ISPM-15 require?
Regulated wood packaging must be heat treated to a minimum core temperature of 56 degrees Celsius for at least 30 minutes (or an approved equivalent such as dielectric heating), or fumigated with methyl bromide. After treatment, the wood is stamped with the IPPC mark showing the country code, facility number, and treatment code (HT, MB, or DH).
How does the United States enforce ISPM-15?
The U.S. implements ISPM-15 through APHIS regulations at 7 C.F.R. § 319.40, and CBP enforces them at the port of entry. Non-compliant wood packaging must generally be immediately re-exported or destroyed — there is no opportunity to treat it after arrival — and CBP issues an Emergency Action Notification directing that action at the importer's expense.
What wood packaging is exempt?
Manufactured wood products like plywood, OSB, particleboard, and veneer are exempt, as are wood components 6 millimeters or less in thickness, sawdust, wood wool, and shavings. Solid raw-wood pallets, crates, and dunnage are regulated and must be treated and marked.
What happens if a live pest is found?
Even validly marked wood can be found to contain a live pest. CBP and APHIS treat a pest interception as a serious threat and can order re-export or destruction of the wood packaging and action on the cargo, regardless of the mark, because treatment can fail or the wood can be reinfested.
Who is responsible for compliance?
The importer and other U.S. parties bear responsibility and cost, even though the wood packaging is usually provided by the foreign supplier. CBP directs enforcement at the party responsible for the shipment in the U.S., and the costs of re-export or destruction fall on the importer.
Can one untreated pallet hold up my whole shipment?
Yes. Because non-compliant wood often cannot be separated from the cargo without unloading the container, a single untreated or unmarked pallet or piece of dunnage can delay the entire shipment while the wood is segregated and re-exported or destroyed.
How can I prevent WPM violations?
Build a compliance program: require ISPM-15 compliance and indemnification in supplier contracts, qualify suppliers with reliable treatment and pest practices, verify the IPPC mark before shipping, cover dunnage and bracing, and keep records. Because violations cannot be fixed after arrival, prevention is the only effective defense.
Keeping Your Shipments Moving
Wood packaging material compliance is one of the easiest requirements to overlook and one of the costliest to get wrong — a single untreated pallet or an intercepted pest can trigger re-export, destruction, delay, and penalties that fall on the importer, not the foreign supplier who provided the wood. The defense is prevention: understanding the ISPM-15 treatment and marking requirements, the APHIS 7 C.F.R. § 319.40 rules, and the exemptions, and building compliance into supplier contracts and pre-shipment verification. If you are facing a CBP or APHIS Emergency Action Notification, a re-export or destruction order, or a WPM penalty, or you want to build a compliance program that prevents these problems, our firm can help. For related guidance, see our international trade and customs practice. Call (213) 645-2246 to discuss a wood packaging or customs compliance matter with an attorney who advises California importers.
Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.
Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301