CUSTOMS COMPLIANCE | 2026-05-25
Customs Duty Drawback Under 19 USC Section 1313: California Exporter Recovery Strategy and Compliance Guide for May 2026
A comprehensive examination of the federal duty drawback program codified at 19 USC Section 1313, the modernized regulatory framework under 19 CFR Part 190 following the Trade Facilitation and Trade Enforcement Act of 2015, the five statutory drawback categories, and the strategic recovery opportunities and limitations confronting California exporters operating through the ports of Los Angeles, Long Beach, and Oakland in the current tariff environment of May 2026.
By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published · Updated
Duty drawback is among the oldest and most commercially significant trade remedy programs in United States law, tracing its statutory origins to the Tariff Act of 1789 and presently codified at Section 313 of the Tariff Act of 1930, 19 USC Section 1313. The program permits the refund of up to 99...
The Statutory Foundation: 19 USC Section 1313 and the Drawback Concept
The duty drawback program embodies a fundamental principle of United States trade policy that has persisted, in one form or another, since the founding of the republic: imported merchandise that ultimately leaves the country in the same condition, or is incorporated into manufactured goods that are subsequently exported, should not bear the burden of permanent customs duties. The economic logic of this principle is straightforward. Tariffs are intended to operate as a tax on goods consumed within the United States, not as a tax on transit through the American economy. Drawback therefore functions as a refund mechanism that aligns the actual incidence of customs duties with the intended scope of tariff policy, ensuring that American manufacturers and traders engaged in re-export activity are not placed at a competitive disadvantage relative to producers located in countries that do not impose comparable import duties on inputs.
Section 313 of the Tariff Act of 1930, codified at 19 USC Section 1313, establishes the statutory architecture governing the modern drawback program. The statute authorizes refund of 99 percent of duties, taxes, and fees paid on imported merchandise when specified conditions are met, with the retained one percent serving as an administrative fee that compensates U.S. Customs and Border Protection for the costs of processing drawback claims. The 99 percent recovery rate has remained constant for decades and applies uniformly across the various categories of drawback eligibility, providing claimants with a predictable and substantial recovery opportunity that often determines the economic viability of import-and-re-export supply chain models.
The scope of duties eligible for drawback recovery is broad but not unlimited. Traditional ad valorem duties imposed under the Harmonized Tariff Schedule of the United States, including most-favored-nation column 1 rates and column 2 rates applicable to nations not granted MFN treatment, are eligible for drawback. Antidumping and countervailing duties, however, are statutorily excluded from drawback eligibility under 19 USC Section 1313(v), reflecting Congress's judgment that the remedial purposes of those duties would be undermined if the duty obligation could be refunded upon subsequent export. Harbor maintenance fees and merchandise processing fees, which were historically subject to varying drawback treatment, were brought within the scope of the program by TFTEA, increasing the value of drawback claims for high-volume importers.
Historical Evolution from the Tariff Act of 1789 to the Modern Statute
The drawback concept entered American law in the very first tariff statute enacted by Congress in 1789, which permitted refund of duties on imported merchandise that was subsequently exported. This early provision reflected the founding generation's commercial realism: a young nation seeking to develop manufacturing and trading capacity could not afford to discourage re-export activity by permanently capturing duties on transient merchandise. Over the subsequent two centuries, Congress has periodically expanded and refined the drawback program, adding new categories of eligibility, adjusting the substitution standards that determine when exported merchandise need not be the identical merchandise that was originally imported, and modernizing the procedural framework to accommodate changing patterns of international trade.
The Economic Rationale and Policy Function of Drawback
From an economic policy perspective, drawback serves as a competitive equalizer that prevents American supply chains from being structurally disadvantaged by the existence of import duties. Without drawback, an American manufacturer that imports components for incorporation into finished goods destined for export markets would bear higher input costs than competitors located in countries operating under duty exemption or free trade zone arrangements. The drawback refund neutralizes this disadvantage, allowing American producers to compete in global markets on the basis of productivity, quality, and innovation rather than being penalized by domestic tariff policy designed for entirely different purposes. For California exporters in industries such as agriculture, electronics, aerospace components, and machinery — sectors that frequently involve imported inputs combined with American value-added processing — the drawback program is often the difference between profitable and unprofitable export activity.
The 2015 TFTEA Modernization and 19 CFR Part 190 Implementation
The Trade Facilitation and Trade Enforcement Act of 2015, signed into law by President Obama on February 24, 2016, represented the most comprehensive modernization of the duty drawback program in nearly a century. The implementing provisions of TFTEA relating to drawback took full effect on February 24, 2018, marking the end of a two-year transition period during which claimants could elect to file under either the legacy or modernized framework. The corresponding regulatory implementation appears at 19 CFR Part 190, which superseded the prior regulations at 19 CFR Part 191 for claims filed after the transition date. Together, the statutory and regulatory changes fundamentally altered the substantive standards, procedural requirements, and operational practices governing drawback recovery.
The most consequential substantive change introduced by TFTEA was the replacement of the historical "same kind and quality" substitution standard with a streamlined standard based on 8-digit Harmonized Tariff Schedule classification matching. Under the legacy framework, claimants seeking to claim drawback on substituted merchandise — rather than identifying the specific imported units that were later exported — were required to demonstrate that the substituted merchandise was of the same kind and quality as the imported merchandise, a fact-intensive inquiry that frequently generated disputes between claimants and CBP. The TFTEA standard substantially simplifies this analysis by deeming substitution permissible whenever the imported and exported merchandise share the same 8-digit HTSUS classification, providing objective certainty that has dramatically expanded the practical availability of substitution drawback.
TFTEA also extended and rationalized the temporal framework for drawback claims. Under the modernized regime, claimants generally have five years from the date of importation of the designated merchandise to file a drawback claim, with the exportation or destruction also required to occur within that five-year window. This uniform five-year timeline replaced a patchwork of varying deadlines under the legacy regime that had created administrative complexity and traps for unwary claimants. Additionally, TFTEA mandated electronic filing of all drawback claims through the Automated Commercial Environment drawback module, eliminating paper claim submissions and integrating drawback processing into the broader ACE infrastructure that governs the modern customs entry process.
Transition from 19 CFR Part 191 to 19 CFR Part 190
The regulatory transition from 19 CFR Part 191 to 19 CFR Part 190 required a substantial conforming effort by both CBP and the trade community. Part 190 reflects the TFTEA statutory amendments, incorporates the 8-digit substitution standard, codifies the ACE filing requirement, and establishes detailed procedural rules governing claim submission, supporting documentation, and CBP review. For California exporters and their customs counsel, Part 190 is the central regulatory text governing all current drawback practice, and familiarity with its provisions is essential to successful claim preparation and defense.
The ACE Drawback Module and Electronic Filing Requirements
The mandatory transition to electronic filing through the ACE drawback module has transformed drawback from a paper-intensive specialty practice into a data-driven discipline that demands integration between importer entry data, exporter shipping records, and drawback claim submissions. The ACE module requires claimants to provide detailed information regarding the designation of import entries, calculation of duties available for drawback, identification of exports supporting the claim, and assertion of the legal basis for drawback eligibility. The electronic format facilitates CBP review, audit, and enforcement, while also exposing claimants to data integrity risks if their underlying records are incomplete or inconsistent with information previously reported on import or export documentation.
The Five Statutory Drawback Categories and Their California Applications
Section 1313 establishes several distinct categories of drawback eligibility, each addressing a different commercial scenario in which the original purpose of the duty obligation is no longer being served because the imported merchandise has left the country, been destroyed, or been transformed into export merchandise. Understanding the categorical structure is essential because the documentation requirements, substitution rules, and procedural standards vary significantly across categories. California exporters typically encounter the unused merchandise and manufacturing drawback categories most frequently, though the rejected merchandise and destruction provisions provide important remedies in specific circumstances.
The first major category is unused merchandise drawback under 19 USC Section 1313(j), which itself divides into two subcategories. Direct identification unused merchandise drawback under Section 1313(j)(1) applies when the specific imported merchandise — identifiable as the same units that were originally imported — is subsequently exported in unused condition. Substitution unused merchandise drawback under Section 1313(j)(2) applies when the exported merchandise, while not necessarily the same physical units as the imported merchandise, shares the same 8-digit HTSUS classification under the TFTEA standard. Both subcategories require that the merchandise not have been used within the United States, with use generally defined to exclude operations such as testing, cleaning, repacking, or inspection that do not change the essential character of the goods.
The second major category is manufacturing drawback under 19 USC Section 1313(a) and 19 USC Section 1313(b). Section 1313(a) provides for direct identification manufacturing drawback, applicable when imported merchandise is used as a component in the manufacture or production of an article that is subsequently exported, with the specific imported components traceable through the manufacturing process to the exported finished goods. Section 1313(b) provides for substitution manufacturing drawback, permitting the substitution of domestic or duty-free merchandise of the same 8-digit HTSUS classification for the imported merchandise in the manufacturing process, with drawback paid based on the duties that were actually paid on the substituted import merchandise.
The third category, rejected merchandise drawback under 19 USC Section 1313(c), applies when imported merchandise is found to be defective, not conforming to sample or specifications, shipped without consent, or determined to be unsatisfactory for the purposes intended. Rejected merchandise drawback permits recovery of duties when the rejected goods are either exported or destroyed under customs supervision, providing a remedy for importers who receive merchandise that does not meet contractual or commercial expectations. The fourth statutory category authorizes drawback for merchandise destroyed under customs supervision in lieu of export, which is particularly valuable when exportation is not commercially feasible or when destruction provides the only practical means of disposal for merchandise that has lost its commercial value.
California Agricultural Exporters and Manufacturing Drawback
California's agricultural export sector — encompassing almonds, walnuts, pistachios, wine, citrus, dairy products, and specialty crops — frequently utilizes imported inputs such as packaging materials, processing equipment components, and certain ingredients that may qualify for manufacturing drawback when incorporated into export shipments. The state's role as the nation's leading agricultural exporter, with significant volumes flowing through Oakland, Long Beach, and Los Angeles to Asian and European markets, makes manufacturing drawback a substantial recovery opportunity for agricultural processors and exporters who systematically identify drawback-eligible inputs and maintain the documentation necessary to support claims.
Aerospace, Electronics, and High-Technology Manufacturing
California's aerospace and electronics manufacturing sectors, concentrated in Southern California and the Bay Area, represent another major beneficiary group for manufacturing drawback. These industries typically involve imported components, subassemblies, and specialty materials that are incorporated into finished products subsequently exported to international customers. The complexity of these manufacturing processes — often involving multiple tiers of suppliers, components subject to varying tariff classifications, and finished goods that combine domestic and imported value-added — requires sophisticated drawback programs supported by enterprise resource planning systems capable of tracking component origin through the manufacturing process.
Substitution Rules, 8-Digit HTSUS Matching, and Documentation Requirements
The substitution provisions of the modernized drawback regime fundamentally determine the practical scope of drawback recovery for most California exporters. Under the TFTEA standard, substitution is permitted when the imported and exported merchandise — or in the manufacturing context, the imported and substituted manufacturing input — share the same 8-digit classification under the Harmonized Tariff Schedule of the United States. This represents a significant liberalization compared to the legacy "same kind and quality" standard, but it nonetheless imposes meaningful constraints that must be navigated with care. The 8-digit HTSUS classification is the U.S. national breakout below the internationally harmonized 6-digit level, and it frequently distinguishes among products that may appear commercially interchangeable but are nonetheless classified separately for tariff purposes.
Documentation requirements under 19 CFR Part 190 are extensive and specific, reflecting CBP's emphasis on auditability and enforcement of drawback claims. Claimants must maintain records establishing the importation, including entry summaries, commercial invoices, packing lists, and proof of duty payment. They must maintain records establishing the export or destruction, including export declarations, bills of lading, commercial invoices, and where applicable, CBP supervision of destruction. They must maintain records establishing the linkage between the imported and exported merchandise, whether through direct identification using unique identifiers such as serial numbers or lot codes, or through inventory accounting methodologies that demonstrate the relationship between import and export activity over time.
The recordkeeping period under 19 CFR 190.15 extends three years after liquidation of the drawback claim, meaning that claimants must preserve supporting documentation for substantial periods after the recovery has been received. This recordkeeping obligation creates ongoing compliance burdens that California businesses must integrate into their broader document retention and records management programs. Failure to produce supporting documentation upon CBP audit can result in disallowance of previously paid drawback claims, with the resulting demand for repayment compounded by interest and potentially penalties depending on the circumstances surrounding the documentation failure.
Inventory Accounting Methodologies for Substitution Claims
Substitution drawback claims, particularly in manufacturing contexts involving fungible commodities or high-volume production operations, often rely on inventory accounting methodologies that demonstrate the relationship between imported merchandise and exported finished goods without requiring tracking of specific physical units through the production process. CBP recognizes several accepted methodologies including first-in-first-out, last-in-first-out, low-to-high, and average methods, each appropriate for different commercial circumstances. The selection of the appropriate inventory methodology requires careful analysis of the claimant's operations, the nature of the merchandise involved, and the audit defensibility of the resulting calculations.
Direct Identification Standards and Unique Identifier Tracking
Direct identification drawback under Sections 1313(j)(1) and 1313(a) requires that the claimant trace the specific imported units to the specific exported units, typically through serial numbers, lot codes, batch identifiers, or similar unique identifiers carried through the manufacturing and shipping process. For high-value or regulated merchandise such as aerospace components, medical devices, or specialty chemicals, direct identification is frequently feasible and may be preferred because it eliminates the analytical complexity of substitution methodologies. For commodity-type merchandise lacking unique identifiers, substitution under Section 1313(j)(2) or Section 1313(b) is generally the only practical approach.
Drawback Eligibility Under Section 232, Section 301, and IEEPA Reciprocal Tariffs
One of the most consequential and frequently misunderstood aspects of current drawback practice concerns the eligibility of duties imposed under the various tariff actions taken since 2018 under different statutory authorities. The applicability of drawback to these duties varies significantly by program, and California exporters seeking to maximize recovery must understand the specific treatment of each tariff category in their supply chains. The interaction between drawback availability and the elevated tariff environment of 2025 and 2026 has substantially complicated the strategic calculus underlying drawback program design.
Section 232 tariffs on steel and aluminum imports, first imposed under Presidential Proclamations 9704 and 9705 in March 2018, are not eligible for drawback. The later proclamations expressly exclude drawback for the Section 232 duties (for steel, beginning with Proclamation 9740 of April 30, 2018, and repeated in the 2025 proclamations), reflecting the policy judgment that the national security rationale underlying the tariffs would be undermined if the duty obligation could be refunded upon subsequent export. This exclusion has remained in place through subsequent expansions and modifications of the Section 232 framework, including the application of Section 232 duties to derivative products and the periodic adjustment of country-specific exclusions and quotas. For California manufacturers utilizing imported steel or aluminum inputs in products destined for export, the Section 232 duties represent a permanent cost that cannot be recovered through drawback, requiring alternative mitigation strategies such as substitution of domestic materials, application for product-specific exclusions, or pricing adjustments to reflect the additional input costs. Update, November 10, 2026: A proclamation published April 9, 2026 created a narrow exception: for goods entered on or after April 6, 2026, manufacturing drawback under 19 U.S.C. § 1313(a) and (b), and no other drawback, is available on the Section 232 metals duties it imposes for articles meeting its conditions, including metal content smelted and cast, or melted and poured, in a listed trade-agreement partner country.
Section 301 tariffs on imports from China, imposed beginning in 2018 in response to findings of intellectual property violations and unfair trade practices, are treated differently. CBP treats Section 301 duties as eligible for drawback: its Drawback Trade Remedies FAQ cites CSMS 18-000419 and requires claims to report both the Chapter 99 HTSUS number for the Section 301 duty and the associated Chapter 1 through 97 number. Substitution claims under the TFTEA rules remain subject to the lesser-of limitation, and exclusions granted by the Trade Representative change which duties were actually paid on a given entry.
The IEEPA tariffs imposed in 2025 were not uniform for drawback purposes. Executive Orders 14193, 14194, and 14195, which imposed IEEPA duties on products of Canada, Mexico, and China, each state that no drawback is available. For the reciprocal duties under Executive Order 14257, CBP’s January 2026 U.S. Tariff Overview lists the rates as “may be eligible for drawback.” After the Supreme Court struck down the IEEPA tariffs on February 20, 2026, importers are recovering IEEPA duties through the IEEPA refund process rather than through drawback; see Drawback or IEEPA Refund? Two Different Ways to Get Customs Duties Back.
Strategic Implications of Tariff-Specific Drawback Limitations
The patchwork of drawback eligibility across different tariff programs creates strategic complexity that California exporters must address through careful supply chain analysis and program design. For a manufacturer importing steel components from Asia for incorporation into machinery destined for European customers, the analysis must account for the non-drawback-eligible Section 232 duties on the steel, the potentially recoverable MFN duties under the underlying HTSUS classification, any IEEPA duties on the imports (which follow the IEEPA refund process rather than drawback), and any Section 301 duties, which CBP treats as drawback-eligible. The cumulative duty cost may be substantial, but only a portion may ultimately be recoverable through drawback, requiring careful cost modeling to determine the economic viability of the export program.
Documentation Requirements for Mixed-Tariff Claims
When claims involve merchandise subject to multiple tariff programs with differing drawback eligibility, the documentation and calculation requirements become substantially more complex. Claimants must accurately segregate the eligible and ineligible duty components on the underlying imports, calculate drawback only on the eligible portion, and maintain documentation supporting the segregation analysis. CBP audits of mixed-tariff drawback claims have placed substantial emphasis on the accuracy of the duty segregation, and errors in this analysis frequently result in claim denials or reductions even when the underlying drawback eligibility for the recoverable portion would otherwise be unquestioned.
ACE Filing Procedures, Accelerated Payment, and the Five-Year Claim Window
The procedural framework governing drawback claim submission, review, and payment has been substantially modernized through the integration of drawback processing into the Automated Commercial Environment. All drawback claims are now filed electronically through the ACE drawback module, which provides standardized data fields for the designation of import entries, identification of supporting exports, calculation of duties available for drawback, and assertion of the legal basis for the claim. The ACE platform also supports the submission of supporting documentation and facilitates CBP review through automated validation checks and data analytics that flag claims for additional scrutiny based on risk indicators.
The accelerated payment privilege available under 19 CFR Part 190 permits qualified claimants to receive drawback payment in advance of CBP's substantive review of the underlying claim, subject to a bond sufficient to cover the estimated drawback to be claimed during the bond term (19 CFR 190.92). Accelerated payment provides substantial cash flow benefits because CBP pays estimated drawback before the claim liquidates instead of after liquidation. The application process for accelerated payment privilege requires demonstration of compliance capability, financial responsibility, and bond coverage, but the benefits typically justify the application effort for any claimant filing drawback claims on a regular basis.
The five-year claim window established under TFTEA represents both an opportunity and a trap. Claimants have five years from the date of importation of the designated merchandise to file the drawback claim, with the export or destruction also required to occur within that period. While five years provides substantial time for commercial activity and claim preparation, the period passes quickly in the context of long-cycle manufacturing operations, and claimants who fail to monitor the approaching expiration of their claim filing window may forfeit substantial recovery opportunities. Effective drawback programs include systematic tracking of import dates, monitoring of approaching deadlines, and timely claim preparation to avoid loss of eligibility through expiration.
Claim Calculation Methodologies and Duty Allocation
The calculation of the drawback recovery amount on any given claim requires careful attention to the specific duties paid on the designated import entries, the allocation of those duties across the merchandise covered by the claim, and the application of the 99 percent recovery factor. For claims involving multiple import entries supporting a single export shipment, or single import entries supporting multiple export shipments, allocation methodologies must be applied to ensure that the total drawback paid across all related claims does not exceed the total duties paid on the underlying imports. CBP enforcement focuses heavily on these allocation calculations, as overpayment of drawback through allocation errors is one of the most common findings in drawback audits.
Bond Requirements and Surety Considerations
The bond required for accelerated payment privilege — since CBP’s 2018 final rule, a continuous bond or a single transaction bond with sufficient balance — must provide adequate coverage for the maximum cumulative drawback exposure that the claimant may have outstanding at any time. The bond calculation must account for the volume of claims, the time required for CBP substantive review, and the potential repayment obligations if claims are subsequently disallowed. Sureties evaluating continuous drawback bonds typically require detailed information regarding the claimant's drawback program, compliance history, and financial stability, and bond premiums vary based on the perceived risk profile. California exporters establishing drawback programs should engage with their surety providers early in the program development process to ensure that bond capacity is available when needed.
Compliance, Recordkeeping, and Common Pitfalls for California Exporters
Successful drawback programs require sustained attention to compliance and recordkeeping practices that extend well beyond the moment of claim submission. The three-year recordkeeping period following payment of a drawback claim means that documentation supporting claims paid today must be maintained and producible upon CBP audit through 2029 or later, creating ongoing custodial obligations that must be integrated into broader document management systems. The audit risk is substantial, as CBP has substantially increased drawback audit activity in recent years as part of broader trade enforcement initiatives, and audit findings adverse to claimants result in repayment obligations, interest charges, and potential penalties.
Common pitfalls undermining California exporter drawback recovery include inadequate linkage documentation between imported and exported merchandise, errors in 8-digit HTSUS classification of either the import or export merchandise that defeat substitution eligibility, failure to identify and exclude non-eligible duty components such as IEEPA reciprocal tariffs and Section 232 duties from the drawback calculation, missed claim filing deadlines under the five-year window, and inadequate proof of exportation. Each of these pitfalls represents a recurring source of CBP audit findings and claim denials that experienced drawback counsel can help claimants avoid through proactive program design and disciplined operational practice.
Proof of exportation requirements have evolved significantly with the modernization of export reporting through the Automated Export System, which is now the primary mechanism through which CBP verifies the export of merchandise supporting drawback claims. AES filings provide standardized data regarding the export transaction, including the date of export, the foreign destination, the value and classification of the exported merchandise, and the identity of the exporter. Claimants must ensure that AES filings are timely, accurate, and consistent with the information reported on the drawback claim, as discrepancies between AES data and drawback claim data are among the most common triggers for CBP follow-up inquiries.
The interaction between drawback compliance and broader customs compliance obligations creates opportunities for both efficiency and risk. Importers who maintain robust compliance programs covering classification, valuation, country of origin, and recordkeeping for their underlying entries are generally well positioned to extract drawback recovery from those entries because the supporting documentation already meets CBP standards. Conversely, importers with weak underlying compliance practices frequently find that drawback claims expose deficiencies that may trigger broader CBP scrutiny, potentially affecting matters extending well beyond the immediate drawback recovery.
Drawback Ruling Requests Under 19 CFR Part 177
CBP issues binding rulings under 19 CFR Part 177 that address specific drawback eligibility questions, providing claimants with advance certainty regarding the treatment of their particular drawback scenarios. Drawback ruling requests are particularly valuable when the eligibility analysis involves novel substitution scenarios, complex manufacturing operations, or unusual factual circumstances that do not fit neatly within published CBP guidance. The investment in obtaining a binding ruling provides not only the substantive answer but also the procedural protection of advance CBP review, reducing audit risk on subsequent claims filed in reliance on the ruling.
Audit Preparation and CBP Examination Procedures
California exporters operating substantial drawback programs should anticipate periodic CBP audit activity and prepare accordingly through systematic documentation organization, internal compliance reviews, and engagement of experienced trade counsel before audits commence. The most successful audit outcomes typically result from claimants who can quickly produce comprehensive supporting documentation, articulate the legal and factual basis for the drawback recovery, and demonstrate sustained compliance with the procedural and substantive requirements of 19 CFR Part 190. Conversely, audits that reveal documentation gaps, inconsistent record-keeping practices, or analytical errors frequently expand in scope and result in adverse findings extending well beyond the entries originally selected for review.
Conclusion: Maximizing Drawback Recovery in the Current Trade Environment
Duty drawback under 19 USC Section 1313 remains one of the most valuable trade remedy programs available to California exporters, providing substantial duty recovery opportunities for businesses engaged in import-and-re-export supply chain models. The modernization of the program through TFTEA and 19 CFR Part 190 has expanded substitution opportunities, streamlined procedural requirements through ACE electronic filing, and uniformly extended the claim filing window to five years from importation. At the same time, the current tariff environment, in which significant portions of the duties imposed on imported merchandise — including Section 232 steel and aluminum duties and antidumping and countervailing duties — are not eligible for drawback recovery, requires sophisticated analysis to determine the actual recovery opportunity available on any given supply chain. California exporters operating through the major Pacific gateway ports of Los Angeles, Long Beach, and Oakland confront this complexity daily, and the difference between successful and unsuccessful drawback programs often lies in the quality of legal counsel, documentation discipline, and operational integration achieved by the participants. Trembach Law Firm assists California exporters with all aspects of duty drawback recovery, including program design, claim preparation, ACE filing, accelerated payment applications, audit defense, and strategic planning to navigate the evolving relationship between drawback eligibility and the current tariff regime. For a confidential consultation regarding your duty drawback recovery opportunities, contact Trembach Law Firm at (818) 514-7680.
Frequently Asked Questions
Can drawback recover Section 301, Section 232, or IEEPA duties?
As of November 10, 2026: CBP treats Section 301 duties as eligible for drawback (CBP Drawback Trade Remedies FAQ, citing CSMS 18-000419). Section 232 steel, aluminum and copper duties carry a no-drawback clause in their proclamations, except that a proclamation published April 9, 2026 allows manufacturing drawback under § 1313(a) and (b), and no other drawback, on its Section 232 metals duties for articles meeting its conditions, for goods entered on or after April 6, 2026. The 2025 Section 232 automobile proclamation bars drawback. Executive Orders 14193, 14194 and 14195 (the IEEPA duties on Canada, Mexico and China) each state that no drawback is available. Antidumping and countervailing duties are never refundable as drawback (19 U.S.C. § 1677h). The current rules are summarized on our duty drawback attorney page.
What is the deadline to file a duty drawback claim?
A complete drawback claim must be filed within 5 years after the date the merchandise designated as the basis for the claim was imported (19 U.S.C. § 1313(r)(1)). Claims not completed within that period are treated as abandoned. For unused merchandise drawback, the goods must also be exported or destroyed within the same 5-year period and before the claim is filed.
How is a drawback claim filed with CBP?
Electronically, in the Automated Commercial Environment through the Automated Broker Interface (ABI). CBP does not accept drawback claims through an ACE Portal account, directly at a CBP office, or on paper; a claimant can self-file, use a licensed customs broker, or use a service bureau. Since February 24, 2019, all claims are filed under the TFTEA rules in 19 C.F.R. Part 190.
Are antidumping and countervailing duties recoverable through drawback?
No. For drawback purposes, antidumping and countervailing duties are not treated as regular customs duties (19 U.S.C. § 1677h), and 19 C.F.R. § 190.3(b) states that drawback is not allowable on them. Ordinary duties on the same entries may still be eligible.
How long must drawback records be kept?
For claims under the TFTEA rules, 19 C.F.R. § 190.15 requires records pertaining to a drawback claim to be kept for 3 years after liquidation of the claim, or longer if another law requires. TFTEA moved the starting point from payment to liquidation.
Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.
Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301