PRODUCT LIABILITY | 2026-11-11
Proving a Product Defect Without the Product: The Malfunction Theory and Circumstantial Evidence in California
How California lets an injured consumer infer a product defect from the way a product failed, under Elmore v. American Motors and the strict liability framework of Barker v. Lull Engineering
By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published
When a nearly new car suddenly loses steering, a water heater explodes, or a ladder collapses under normal use, the injured person often cannot point to the exact defective part. The product may be destroyed in the very accident that injured the plaintiff, consumed by fire, or so damaged that no exp
Product liability cases are easiest to prove when an expert can open the product, identify the defective component, and explain exactly how it failed. Many real cases are not that tidy. The product that injured the plaintiff is frequently damaged, burned, or destroyed in the accident, leaving no clean part to examine. California law does not punish injured consumers for that evidentiary gap. Instead, it allows a jury to infer that a product was defective from circumstantial evidence about the way it malfunctioned, a doctrine often called the malfunction theory. The foundational California authority is Elmore v. American Motors Corp. (1969) 70 Cal.2d 578, which is best known for extending strict liability to injured bystanders but also recognized that a plaintiff may establish the existence of a defect, and the defendant's responsibility for it, by circumstantial evidence.
The Problem the Malfunction Theory Solves
Strict products liability in California holds manufacturers and others in the chain of distribution responsible for injuries caused by defective products. But a plaintiff still bears the burden of proving that the product was defective and that the defect caused the injury. When the product is intact and available, experts can often pinpoint the defect. When the product is destroyed, altered, or simply too complex to dissect after a catastrophic failure, requiring the plaintiff to identify the precise defective component would make recovery impossible in exactly the cases where the product failed most dramatically.
The malfunction theory resolves this by recognizing a commonsense inference: when a product fails in a manner that would not ordinarily happen unless something was wrong with it, and other reasonable explanations for the failure are eliminated, a jury may conclude that the product was defective even without proof of the specific defect. The reasoning resembles the logic of res ipsa loquitur in ordinary negligence, although the two doctrines are distinct.
Elmore v. American Motors and Circumstantial Proof
In Elmore v. American Motors Corp., the California Supreme Court confronted a nearly new Rambler station wagon, driven roughly 2,700 miles, whose drive shaft dropped while the car was moving, sending it across the center line into an oncoming car. The case is best known for holding that strict products liability protects foreseeable bystanders, not just purchasers and users. But the court also stated that a plaintiff is entitled to establish the existence of the defect and the defendants' responsibility for it by circumstantial evidence. Expert testimony in Elmore linked the physical evidence, including gouge marks in the pavement, to the drive shaft failure and indicated that normal wear and tear or anything the driver did would not cause a drive shaft to fall in so few miles, and the court held that evidence sufficient to reach the jury.
Elmore supports the proposition that the fact of a product failure, combined with evidence tending to exclude other causes, can support an inference of defect. California courts have continued to recognize circumstantial proof of defect, allowing juries to infer defects from the circumstances of a failure where the evidence reasonably points to a defect existing when the product left the manufacturer. The theory is not a presumption that every failed product was defective; it is a permissible inference that a jury may draw when the circumstances warrant it.
How the Malfunction Theory Fits the Barker Framework
California defines design defects under the two-pronged test of Barker v. Lull Engineering Co. (1978) 20 Cal.3d 413. A product may be found defective in design if it failed to perform as safely as an ordinary consumer would expect when used in an intended or reasonably foreseeable manner, the consumer expectations test, or if the benefits of the design do not outweigh the risk of danger inherent in the design, the risk-benefit test. Manufacturing defects, by contrast, exist when a product differs from the manufacturer's intended design or from other ostensibly identical units, and they are evaluated against the product's own specifications.
The malfunction theory operates comfortably within this framework, particularly for manufacturing defects and for consumer-expectations design claims. When a product fails in a way that an ordinary consumer would not expect during normal use, the failure itself can be powerful evidence that the product did not perform as safely as expected. The jury is permitted to use the circumstances of the malfunction to find that the product was defective, whether the defect is best characterized as a manufacturing flaw in that particular unit or a design that failed to meet consumer safety expectations.
The Role of Consumer Expectations
The consumer expectations test is especially hospitable to circumstantial proof. Under Soule v. General Motors Corp. (1994) 8 Cal.4th 548, the consumer expectations test is reserved for cases in which the everyday experience of the product's users permits a conclusion that the product's design violated minimum safety assumptions, and is not appropriate where the question of design is beyond the common experience of jurors and requires technical analysis. Within its proper domain, however, consumer expectations allows a jury to say that a product that failed catastrophically during ordinary use simply did not do what consumers reasonably expect it to do.
A tire that disintegrates on a normal highway drive, a brake system that fails on a short trip, or an appliance that bursts into flames while operating as intended can all violate the basic safety expectations of ordinary consumers. In those cases, the plaintiff may not need to prove the engineering details of the defect; the failure, in context, speaks to the expectation. Where the product's performance is beyond common experience and demands technical evaluation, Soule channels the case toward the risk-benefit test, where expert testimony typically becomes necessary.
Eliminating Other Causes
The malfunction theory is not a free pass. To support the inference of defect, the plaintiff generally must present evidence tending to exclude other reasonable causes of the failure, such as misuse, alteration, abnormal wear, or the ordinary end of a product's service life. A brand-new product that fails during normal use presents a much stronger inference than an old, heavily used, or modified product. Evidence that the product was used as intended, was relatively new, had not been altered, and failed in a way associated with defects rather than ordinary use strengthens the inference considerably.
Defendants attack malfunction-theory cases precisely by offering alternative explanations: the plaintiff misused the product, a third party modified it, the failure resulted from normal wear, or some external event caused the accident. The plaintiff's job is to marshal the circumstantial evidence, often including the history of the product, the manner of the failure, maintenance records, and expert testimony about failure patterns, to make the inference of defect the most reasonable explanation. The stronger the elimination of alternative causes, the stronger the case.
The Chain of Distribution and Who Is Liable
California strict products liability extends up the entire chain of distribution. A plaintiff injured by a defective product can pursue the manufacturer, distributors, and retailers who placed the product into the stream of commerce, because strict liability is imposed to ensure that the costs of defective products are borne by those who profit from putting them on the market rather than by injured consumers. This matters in malfunction-theory cases because even when the specific defect cannot be traced to a particular actor, the entities in the distribution chain can be held strictly liable if the product was defective when it left their hands.
The circumstantial nature of the proof does not change who may be liable; it changes how the defect is proved. Once the jury infers that the product was defective and that the defect existed when the product left the defendant's control, the ordinary rules of strict liability apply to allocate responsibility among the manufacturer and other distribution-chain defendants. This is one reason preserving the product, where possible, and documenting its provenance matters so much to a successful claim.
Preserving Evidence and Retaining Experts
Although the malfunction theory exists precisely because evidence is often destroyed, plaintiffs should still make every effort to preserve whatever remains of the product and its surroundings. Even a damaged or partially consumed product can yield valuable evidence, and a failure-analysis expert can frequently reconstruct the likely mode of failure and rule out alternative causes from what is left. Photographs, the accident scene, maintenance and purchase records, and witness accounts of how the product behaved before and during the failure all contribute to the circumstantial case.
Retaining a qualified engineering or failure-analysis expert early is critical, both to develop affirmative evidence of defect and to counter the defense's alternative-cause theories. California juries are instructed on strict products liability through the Judicial Council of California Civil Jury Instructions, including CACI 1201 for manufacturing defects and CACI 1203 (consumer expectation test) and CACI 1204 (risk-benefit test) for design defects, and a well-prepared expert helps the jury connect the circumstantial evidence to those legal standards. The combination of preserved physical evidence, documentary history, and expert analysis is what turns a product failure into a provable defect.
Why the Malfunction Theory Matters to Injured Californians
For an injured consumer, the malfunction theory can be the difference between a viable claim and no claim at all. People injured by products rarely have the engineering knowledge to identify a specific defect, and the products that cause the most serious injuries are often the ones most thoroughly destroyed in the event. By allowing juries to infer a defect from the circumstances of a failure, California law aligns the burden of proof with reality and keeps strict products liability meaningful for the people it was designed to protect.
If you were hurt by a product that failed during normal use, do not assume your case is hopeless because the product was destroyed or because you cannot name the defective part. The circumstances of the failure may themselves prove the defect under long-standing California authority. Trembach Law Firm investigates product failures, preserves and analyzes the available evidence, and builds strict liability cases using both direct and circumstantial proof, including for clients served by our Los Angeles personal injury lawyer team. Call (213) 645-2246 for a free consultation about your product injury.
Related Doctrines That Support Circumstantial Proof
The malfunction theory does not stand alone; it is reinforced by other strands of California products-liability law. In Jiminez v. Sears, Roebuck & Co. (1971) 4 Cal.3d 379, a case involving a stepladder that broke during use, the California Supreme Court held that a plaintiff may pursue negligence alongside strict liability and may be entitled to a res ipsa loquitur instruction, observing that when a recently acquired ladder that has not been mistreated breaks in normal usage, there is an inference that it was negligently constructed or designed, even where the evidence about any particular defect is sharply conflicting. In Campbell v. General Motors Corp. (1982) 32 Cal.3d 112, involving a bus seat with no nearby grab bar, the court held that expert testimony was not required for the jury to decide whether the design met ordinary consumers' safety expectations, because the issue was within common experience. Together these decisions confirm that California does not demand metaphysical certainty about the mechanism of failure; it asks whether the evidence, taken as a whole, reasonably supports the conclusion that the product was defective when it left the defendant's control.
This body of law reflects a deliberate policy choice. Strict products liability was adopted in California, beginning with the landmark decision in Greenman v. Yuba Power Products, Inc. (1963) 59 Cal.2d 57, precisely to relieve injured consumers of the burden of proving manufacturer negligence, so that the costs of injuries from defective products are borne by the manufacturers that put them on the market rather than by injured persons who are powerless to protect themselves. Requiring an injured plaintiff to identify the exact defect in a destroyed product would reintroduce, through the back door, the very proof burden that strict liability was meant to remove. The malfunction theory keeps the doctrine faithful to its purpose.
What a Strong Circumstantial Case Looks Like
In practice, the strongest malfunction-theory cases share several features. The product was relatively new or had been properly maintained, which undercuts arguments about wear and end-of-life failure. The product was being used in a normal, intended, or reasonably foreseeable way at the time of the failure, which supports the consumer-expectations inference. There is no evidence of alteration or abuse by the plaintiff or a third party, which eliminates competing causes. And the manner of the failure is one that experience associates with defects rather than with ordinary use, such as a steering component separating, a pressure vessel rupturing, or a safety mechanism failing to engage. When these facts line up, a jury can comfortably infer a defect even though no one can point to the specific flawed part.
Conversely, the defense will probe each of these points, arguing that the product was old, misused, modified, or subjected to an external force that explains the failure without any defect. That is why the plaintiff's investigation must move quickly to secure the product, the scene, and the documentary history before that evidence disappears. A well-developed circumstantial record, supported by a credible failure-analysis expert who can exclude the alternative causes the defense will raise, is what allows the malfunction inference to carry the plaintiff's burden under California law.
- California Personal Injury Lawyers
- Product Recalls and Injury Claims in Los Angeles: How CPSC and NHTSA Recalls Work and What a Recall Does and Does Not Prove
- Strict Products Liability for Design Defects in California: The Barker Two-Prong Test, the Consumer-Expectation and Risk-Benefit Standards, and When Each Applies
- How a Los Angeles Product Liability Lawsuit Proceeds: Filing, Federal Removal, Expert Testing, Sargon Hearings, Settlement and Trial
Frequently Asked Questions
Can I win a product liability case if the product was destroyed?
It may still be possible. Under California authority such as Elmore v. American Motors, a plaintiff may be able to prove a defect through circumstantial evidence about how the product failed, without identifying the specific defective part, when the failure is one that ordinarily would not occur absent a defect and other causes are reasonably excluded.
What is the malfunction theory?
It is the principle that a jury may infer a product was defective from the manner of its failure. If a product malfunctions in a way that would not normally happen unless it was defective, and alternative explanations are eliminated, the jury may find a defect even without direct proof of the specific flaw.
Do I still need an expert witness?
Usually it helps a great deal. Even in malfunction-theory cases, a failure-analysis expert can reconstruct the likely mode of failure, exclude alternative causes, and connect the circumstantial evidence to the legal standard. Expert testimony is particularly important where the product's design is beyond the common experience of jurors.
How does this fit with the Barker design-defect test?
California evaluates design defects under Barker v. Lull Engineering using the consumer expectations test and the risk-benefit test. The malfunction theory supports both manufacturing-defect claims and consumer-expectations design claims, because a failure during ordinary use can show the product did not perform as safely as an ordinary consumer would expect.
What is the consumer expectations test?
Under Barker, a product is defective in design if it failed to perform as safely as an ordinary consumer would expect when used as intended or in a reasonably foreseeable manner. Under Soule v. General Motors, that test applies where everyday experience lets jurors judge the product's safety, not where technical analysis is required.
What will the manufacturer argue against my case?
Defendants typically offer alternative explanations for the failure, such as misuse, modification by a third party, abnormal wear, or the product reaching the end of its service life. The plaintiff counters by showing the product was used as intended, was not altered, and failed in a way associated with defects.
Who can I sue for a defective product?
California strict liability extends to everyone in the chain of distribution, including the manufacturer, distributors, and retailers who placed the product into the stream of commerce. A defect proved through circumstantial evidence can support liability against these parties if the product was defective when it left their control.
What should I do to protect my claim?
Preserve whatever remains of the product and do not discard it, keep purchase and maintenance records, photograph the product and scene, and contact a product liability attorney promptly so evidence can be secured and an expert retained before the remaining proof is lost.
Trembach Law Firm represents California consumers injured by defective products and builds cases using direct and circumstantial proof of defect. For a free consultation, call (213) 645-2246. Related guides: Product Liability and Personal Injury.
This article is provided for general informational purposes only and is not legal advice. Reading it does not create an attorney-client relationship. Every case depends on its own facts, and no particular outcome is guaranteed.
Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.
Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301