CUSTOMS COMPLIANCE | 2026-02-26

Section 122 Duty Drawback, FTZ, and Tariff Mitigation for California

CBP has confirmed that duty drawback is available for Section 122 surcharge duties, and importers may leverage bonded warehouse timing strategies, Foreign Trade Zone planning, and the in-transit exception to minimize exposure during the 150-day temporary surcharge period from February 24 through July 24, 2026.

By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published · Updated

On February 24, 2026, the 15 percent ad valorem import surcharge imposed under Section 122 of the Trade Act of 1974 took effect, subjecting substantially all imported merchandise entering the United States to an additional duty layer classified under HTSUS subheading 9903.03.01. For California...

Background: The Section 122 Surcharge and Its Impact on California Import Costs

The imposition of a 15 percent ad valorem surcharge under Section 122 of the Trade Act of 1974, codified at 19 U.S.C. Section 2132, represents the most significant temporary tariff action in modern U.S. trade history. Effective February 24, 2026, the surcharge applies to substantially all articles imported into the customs territory of the United States, classified under HTSUS subheading 9903.03.01, and is assessed in addition to all other applicable duties, including normal trade relations (column 1) tariff rates, Section 232 duties on steel and aluminum, Section 301 duties on Chinese-origin goods, and antidumping and countervailing duties. The surcharge was invoked by presidential proclamation following the Supreme Court's 6-3 decision in Learning Resources, Inc. v. Trump on February 20, 2026, which invalidated the IEEPA-based tariff framework, and it carries a statutory expiration date of July 24, 2026 — exactly 150 days from its effective date, the maximum duration permitted under Section 122 absent congressional authorization for extension.

For California, the Section 122 surcharge carries outsized economic significance. The San Pedro Bay port complex — comprising the Ports of Los Angeles and Long Beach — is the nation's largest gateway for containerized imports, handling more than 9 million twenty-foot equivalent units annually and serving as the primary entry point for consumer electronics, apparel, automotive parts, furniture, toys, and industrial components sourced from Asia-Pacific manufacturing centers. At a 15 percent ad valorem rate, the surcharge adds billions of dollars in aggregate duty costs to merchandise flowing through California ports during the 150-day surcharge period. An electronics importer bringing in $50 million in dutiable merchandise during the surcharge period faces $7.5 million in additional Section 122 duties alone, before accounting for underlying MFN rates and any applicable Section 301 or antidumping duties. For apparel importers, automotive parts distributors, and consumer goods companies operating on thin margins, the surcharge transforms the economics of every purchase order and inventory decision made between February 24 and July 24, 2026.

The enumerated exemptions under HTSUS subheadings 9903.03.02 through 9903.03.11 provide relief for specific product categories including goods qualifying under USMCA, merchandise already subject to Section 232 duties, critical minerals, energy products, pharmaceuticals, certain electronics, aerospace components, agricultural products, and information materials. However, these exemptions cover only a fraction of the merchandise flowing through California ports, leaving the vast majority of imported goods subject to the full 15 percent surcharge. The temporary nature of the surcharge — with its hard July 24 expiration date — creates both a compliance challenge and a strategic opportunity: importers and exporters who understand and deploy the available tariff mitigation tools can materially reduce their net Section 122 duty exposure, recover duties already paid, and position their supply chains to minimize the cost impact of the surcharge during its limited effective period.

CBP Confirmation: Duty Drawback Eligibility for Section 122 Duties

In a development of major significance for California exporters, U.S. Customs and Border Protection has confirmed through CSMS (Cargo Systems Messaging Service) guidance that duty drawback is available for Section 122 surcharge duties. This confirmation resolves a threshold question that had generated considerable uncertainty in the trade community following the surcharge's imposition: whether the Section 122 surcharge, as a temporary balance-of-payments measure rather than a permanent tariff, would qualify as a "duty" eligible for drawback recovery under 19 U.S.C. Section 1313. CBP's affirmative guidance establishes that the Section 122 surcharge is treated as a customs duty for drawback purposes, meaning that eligible claimants may recover up to 99 percent of the Section 122 duties paid on imported merchandise that is subsequently exported or destroyed under CBP supervision.

The practical significance of this confirmation cannot be overstated for California's trade community. California is not only the nation's largest import gateway but also a major export platform. Many California businesses both import raw materials, components, or finished goods subject to the Section 122 surcharge and export manufactured products, re-exported merchandise, or goods that incorporate imported inputs. For these dual-flow businesses, drawback provides a direct mechanism to recover the Section 122 duties paid on import, effectively reducing the net surcharge burden from 15 percent to as little as 0.15 percent (the 1 percent statutory retention). A California electronics manufacturer that imports $20 million in Asian-sourced components subject to the Section 122 surcharge and exports $15 million in finished products containing those components could recover up to $2.2275 million in Section 122 drawback — the 99 percent recovery applied to the $2.25 million in Section 122 duties attributable to the exported portion. At scale, across the full spectrum of California's import-export economy, the aggregate drawback recovery opportunity for Section 122 duties represents hundreds of millions of dollars.

CBP's CSMS guidance also clarified procedural requirements for Section 122 drawback claims. Claimants must identify the specific import entries on which Section 122 duties were paid, demonstrate the required nexus between the imported merchandise and the exported merchandise (which varies depending on the type of drawback claimed), and file drawback claims through the ACE (Automated Commercial Environment) system using the established electronic filing procedures. The guidance confirmed that all statutory drawback types — manufacturing drawback, unused merchandise drawback, and substitution drawback — are available for Section 122 duties, provided that the claimant satisfies the applicable statutory and regulatory requirements for each drawback type. This comprehensive availability of drawback for Section 122 duties creates multiple recovery pathways that California businesses should evaluate based on their specific import, manufacturing, and export operations.

Manufacturing Drawback Under 19 USC 1313(a) and (b): Procedures and Requirements

Manufacturing drawback, authorized under 19 U.S.C. Section 1313(a) for direct identification drawback and 19 U.S.C. Section 1313(b) for substitution manufacturing drawback, provides the primary recovery mechanism for California manufacturers that import raw materials or components subject to the Section 122 surcharge and use those inputs to produce articles that are subsequently exported. Under Section 1313(a), a manufacturer that imports a specific article, pays duties including the Section 122 surcharge on that article, uses the imported article in the manufacture or production of a different article, and then exports the manufactured article may claim drawback of 99 percent of the duties paid on the imported input. The direct identification requirement under Section 1313(a) means that the claimant must demonstrate that the specific imported merchandise — identified by entry number, lot number, or other tracking mechanism — was actually used in the production of the exported article. For California manufacturers with sophisticated inventory management systems that can trace imported inputs through the production process to specific export shipments, direct identification manufacturing drawback provides a straightforward and well-established recovery path for Section 122 duties.

Section 1313(b) provides an alternative through substitution manufacturing drawback, which relaxes the direct identification requirement by allowing the claimant to substitute domestic or other merchandise classifiable under the same 8-digit HTSUS subheading for the imported duty-paid merchandise in the manufacturing process. Under substitution drawback, the manufacturer need not prove that the specific imported article on which Section 122 duties were paid was physically used in the exported product. Instead, the manufacturer must demonstrate that it used merchandise classifiable under the same 8-digit HTSUS subheading as the designated imported merchandise in manufacturing the exported article within five years of the date of importation. The Trade Facilitation and Trade Enforcement Act of 2015 (TFTEA) modernized the substitution standard, replacing the former "same kind and quality" requirement with this objective 8-digit classification test. For California manufacturers in sectors such as electronics, automotive parts, chemicals, and processed foods — where imported and domestic inputs of identical specifications are frequently used interchangeably in production — substitution manufacturing drawback under Section 1313(b) provides a more practical recovery mechanism than direct identification, as it does not require the manufacturer to trace specific imported lots through the production process.

The procedural requirements for manufacturing drawback claims involve several critical elements that California manufacturers must address to successfully recover Section 122 duties. First, the claimant must have a valid drawback ruling or general manufacturing drawback ruling on file with CBP, specifying the manufacturing process, the imported inputs, and the exported outputs that form the basis of the drawback claim. TFTEA simplified the ruling process by establishing general manufacturing drawback rulings that cover common manufacturing processes, reducing the need for company-specific rulings in many cases. Second, the claimant must maintain records sufficient to support the drawback claim, including import entry documentation, manufacturing records demonstrating the use of imported or substituted inputs, and export documentation confirming the exportation of the manufactured article. Third, the drawback claim must be filed within five years of the date of importation of the designated imported merchandise, providing a generous window for claims but one that nonetheless requires timely action. Given that the Section 122 surcharge period runs only 150 days, from February 24 through July 24, 2026, manufacturers should begin identifying eligible import entries, documenting manufacturing processes, and preparing drawback claims as early as possible to maximize recovery.

California's manufacturing sector presents particularly strong drawback opportunities under the Section 122 surcharge. The state's aerospace manufacturers import aluminum alloys, titanium products, avionics components, and specialized fasteners that may be subject to the surcharge, then export finished aircraft assemblies, engine components, and defense articles. The state's electronics manufacturers import semiconductors, display panels, circuit boards, and passive components, manufacturing them into finished devices and systems destined for global markets. The automotive sector imports drivetrain components, sensors, wiring harnesses, and body panels for assembly into vehicles and subassemblies exported to Canadian and Mexican plants or shipped to overseas markets. In each of these sectors, the combination of significant import volumes subject to the Section 122 surcharge and substantial export activity creates a manufacturing drawback opportunity that can recover the vast majority of the surcharge cost on the export-attributable portion of imported inputs.

Unused Merchandise and Substitution Drawback Under 19 USC 1313(j)

For California importers that do not manufacture or process imported merchandise but instead export the goods in the same condition as imported, or that export domestic merchandise classifiable under the same 8-digit HTSUS subheading, 19 U.S.C. Section 1313(j) provides the applicable drawback recovery mechanism. Section 1313(j)(1) authorizes unused merchandise drawback, permitting the recovery of 99 percent of duties paid — including Section 122 surcharge duties — on imported merchandise that is exported or destroyed under CBP supervision without having been used in the United States prior to exportation. This provision is directly relevant to California's re-export trade, which includes significant volumes of merchandise imported through the Ports of Los Angeles and Long Beach for subsequent re-exportation to markets in Latin America, the Pacific Islands, and other destinations. A California distributor that imports consumer electronics from Asia, pays the 15 percent Section 122 surcharge, and subsequently re-exports the same merchandise to a customer in South America may recover 99 percent of the Section 122 duties through an unused merchandise drawback claim under Section 1313(j)(1).

Section 1313(j)(2) extends drawback eligibility to substitution scenarios, where the exported merchandise is not the same physical article as the imported merchandise on which duties were paid, but is instead merchandise classifiable under the same 8-digit HTSUS subheading that is exported within the statutory timeframe. TFTEA replaced the former commercial interchangeability test with this classification standard, and the claimant must have had possession of the substituted merchandise. This provision is particularly valuable for California businesses that maintain large inventories of fungible goods sourced from multiple countries. For example, a California apparel distributor that imports garments from Vietnam subject to the Section 122 surcharge and also purchases identical garments domestically may claim substitution drawback when exporting the domestically sourced garments, provided the imported and domestic garments are classified under the same 8-digit HTSUS subheading and the distributor had possession of the domestic garments before export. The substitution drawback mechanism effectively allows the importer to treat the duty-paid imported merchandise and the exported substitute merchandise as economically equivalent for drawback purposes, recovering Section 122 duties paid on import even though the specific imported goods remain in the domestic market.

The timing requirements for unused merchandise and substitution drawback under Section 1313(j) warrant careful attention from California businesses pursuing Section 122 duty recovery. Under current law, as amended by TFTEA, the exported merchandise must be exported within five years of the date of importation of the designated duty-paid merchandise for direct identification claims, or within five years for substitution claims where the substitute merchandise is exported and the imported merchandise was received by the claimant within the applicable period. The five-year window provides substantial flexibility for matching import entries bearing Section 122 duties with corresponding export transactions. However, given that the Section 122 surcharge applies only during the 150-day period from February 24 through July 24, 2026, the universe of import entries eligible for Section 122 drawback is inherently limited to entries made during that window. California exporters should therefore focus their drawback planning on identifying all import entries subject to the Section 122 surcharge during the surcharge period, cataloging corresponding export transactions or planned export activity, and preparing drawback claims that capture the maximum recoverable amount.

Bonded Warehouse Strategies: Timing Withdrawals Around the July 24 Expiration

Bonded warehouses, authorized under 19 U.S.C. Section 1555 and administered pursuant to 19 CFR Part 19, offer California importers a powerful strategy for avoiding the Section 122 surcharge entirely by exploiting the fundamental timing principle that governs bonded warehouse operations: duty is assessed at the rate in effect at the time of withdrawal for consumption, not at the time of importation or admission to the warehouse. This principle means that merchandise imported into the United States during the Section 122 surcharge period and admitted to a bonded warehouse is not assessed the 15 percent surcharge at the time of admission. Instead, the applicable duty rate — including any special duties such as the Section 122 surcharge — is determined when the merchandise is withdrawn from the warehouse and entered for consumption in the U.S. market. If the Section 122 surcharge expires on July 24, 2026, as statutorily required absent congressional extension, merchandise withdrawn from bonded warehouse storage after that date would not be subject to the surcharge at all, even though it was imported during the surcharge period.

The strategic implications of this timing principle are profound for California importers with the financial capacity and operational flexibility to hold inventory in bonded storage. Consider a California automotive parts distributor that imports $30 million in components from Japan and South Korea during the Section 122 surcharge period. If the distributor enters the merchandise directly for consumption upon arrival, it owes $4.5 million in Section 122 surcharge duties in addition to the applicable MFN rates. If instead the distributor admits the merchandise to a bonded warehouse and defers withdrawal until after July 24, 2026, the Section 122 surcharge does not apply, saving the full $4.5 million. The cost of this strategy is the bonded warehouse storage fees — typically ranging from $0.50 to $2.00 per square foot per month for general warehouse space in the Southern California market — plus the carrying cost of capital tied up in inventory that cannot be sold into the U.S. market until withdrawn. For high-value, compact merchandise such as electronics, automotive components, and industrial equipment, the storage cost is often a small fraction of the Section 122 duty savings, making the bonded warehouse strategy economically compelling.

Merchandise may be stored in a bonded warehouse for up to five years from the date of importation, providing an extraordinarily long deferral window that far exceeds the 150-day duration of the Section 122 surcharge. This means that even if Congress were to extend the surcharge beyond July 24, 2026 — a possibility that requires affirmative congressional action under Section 122's statutory framework — importers would have years of additional storage time available to wait out any extension. In practice, most California importers pursuing a bonded warehouse strategy for Section 122 mitigation will plan to withdraw merchandise shortly after the surcharge expires, minimizing storage costs while capturing the full duty savings. The key operational considerations include identifying bonded warehouse capacity in the Southern California logistics corridor, negotiating storage terms with warehouse operators, establishing admission and withdrawal procedures with CBP, and managing inventory to ensure that merchandise needed for immediate sale is differentiated from merchandise that can be held for deferred entry. California's extensive network of bonded warehouses in the greater Los Angeles area, the Inland Empire, and the Long Beach-Carson-Compton logistics corridor provides ample capacity for this strategy, though demand for bonded storage may increase as more importers recognize the Section 122 timing arbitrage opportunity.

Importers must also consider the interaction between bonded warehouse storage and other tariff obligations. The withdrawal-rate principle applies to all applicable duties, not just the Section 122 surcharge. If other tariff rates change during the warehousing period — whether due to the imposition of new duties, the expiration of existing duties, or changes in tariff classification — the rate in effect at the time of withdrawal governs. For merchandise subject to Section 301 duties on Chinese-origin goods, the withdrawal-rate principle means that any changes to Section 301 rates during the warehousing period would also affect the total duty assessed at withdrawal. California importers must therefore evaluate the full tariff landscape, not just the Section 122 surcharge, when deciding whether and when to withdraw merchandise from bonded storage. The bonded warehouse strategy is most effective when the importer has high confidence that the Section 122 surcharge will expire on July 24 without extension and that other applicable duty rates will not increase during the deferral period.

Foreign Trade Zone Planning Under Section 122: Privileged Foreign Status Implications

Foreign Trade Zones present a more complex tariff mitigation calculus under the Section 122 surcharge than bonded warehouses, due to the presidential proclamation's requirement that goods admitted to an FTZ on or after February 24, 2026, must be entered in privileged foreign status. Under 19 CFR Part 146 and the FTZ Act (19 U.S.C. Section 81a et seq.), FTZs are designated areas within or adjacent to U.S. ports of entry where foreign and domestic merchandise may be admitted for storage, exhibition, assembly, manufacturing, and other processing activities without being subject to formal customs entry or the payment of duties. The duty treatment of FTZ merchandise depends on the status under which the merchandise is admitted: privileged foreign status, nonprivileged foreign status, or zone-restricted status. The Section 122 proclamation's requirement for privileged foreign status admission has significant implications for FTZ operators and users throughout California's extensive FTZ network.

Privileged foreign status, governed by 19 CFR Section 146.41, locks in the tariff classification, duty rate, and applicable special duties — including the Section 122 surcharge — as of the date of admission to the FTZ. This means that merchandise admitted to a California FTZ in privileged foreign status on or after February 24, 2026, and before July 24, 2026, will be assessed the 15 percent Section 122 surcharge when eventually entered for consumption, regardless of whether the surcharge is still in effect at the time of entry. The privileged foreign status determination crystallizes the duty obligation at the point of FTZ admission, preventing zone users from deferring entry until after the surcharge expires — a strategy that would otherwise parallel the bonded warehouse approach. This distinction between FTZ privileged foreign status and bonded warehouse withdrawal-rate treatment is critical: while bonded warehouse users benefit from the rate-at-withdrawal principle and can defer entry to avoid the surcharge, FTZ users who admit merchandise in privileged foreign status during the surcharge period lock in the surcharge obligation at the point of admission.

The practical consequences for California's FTZ operations are substantial. California hosts numerous active Foreign Trade Zones, including FTZ No. 202 serving the Los Angeles International Airport area, FTZ No. 236 at the Port of Long Beach, FTZ No. 50 in Long Beach, and various subzones authorized for specific manufacturing and distribution operations throughout Southern California and the San Francisco Bay Area. Companies that have been using FTZs for manufacturing, assembly, or distribution operations must understand that admitting imported merchandise to their zones during the Section 122 surcharge period will trigger the privileged foreign status requirement, locking in the surcharge even if the merchandise is not entered for consumption until after July 24, 2026. This reduces the tariff deferral benefit that FTZs typically provide and may lead some zone users to reconsider whether FTZ admission is the optimal strategy during the surcharge period, particularly for merchandise that could alternatively be routed to bonded warehouses where the withdrawal-rate principle would allow surcharge avoidance.

Despite the privileged foreign status limitation, FTZs retain important benefits during the Section 122 period that may justify continued zone utilization. The inverted tariff benefit — where an FTZ user can elect to pay the lower duty rate applicable to the finished product rather than the higher rates applicable to imported components — remains available for zone-based manufacturing operations. If the Section 122 surcharge applies to a component at 15 percent but the finished product assembled in the FTZ qualifies for an exemption under one of the HTSUS subheadings 9903.03.02 through 9903.03.11, the zone user may realize a net tariff reduction by manufacturing within the FTZ and entering the finished exempt product for consumption. Additionally, FTZ users retain the benefit of duty elimination on merchandise that is re-exported from the zone, merchandise that is destroyed or scrapped within the zone, and merchandise that experiences waste or loss during zone-based manufacturing — benefits that are not available for merchandise entered directly for consumption. California FTZ operators should conduct a thorough cost-benefit analysis comparing the privileged foreign status surcharge lock-in against the operational and tariff benefits of continued zone utilization during the Section 122 period.

The In-Transit Exception: Protecting Goods on the Water Before February 24

The presidential proclamation imposing the Section 122 surcharge includes an in-transit exception that exempts from the surcharge merchandise that was loaded aboard an ocean vessel at a foreign port and was in transit to the United States before the surcharge's February 24, 2026, effective date. This exception reflects the longstanding principle in U.S. customs law that importers should not be penalized by tariff changes affecting goods that were already committed to shipment before the change was announced or took effect. The in-transit exception provides critical relief for California importers who had placed orders, loaded containers, and dispatched vessels from Asian, European, and other foreign ports before the surcharge was proclaimed, and who would otherwise face an unexpected 15 percent cost increase on merchandise they had no opportunity to reroute or cancel.

The scope of the in-transit exception turns on the specific factual determination of when merchandise was "loaded aboard a vessel" at a foreign port. CBP has interpreted this requirement to mean that the merchandise must have been physically loaded onto the ocean vessel — meaning placed aboard the carrying vessel for the ocean leg of the journey to the United States — before February 24, 2026. Merchandise that was in a foreign port warehouse, on a feeder vessel, in a container yard awaiting loading, or in any other pre-loading status as of February 24 does not qualify for the exception, even if the booking was confirmed, the bill of lading was issued, or the container was sealed before that date. The critical fact is the date of physical loading onto the ocean-going vessel. California importers seeking to invoke the in-transit exception must obtain documentation from the ocean carrier or freight forwarder confirming the loading date, typically in the form of the on-board bill of lading, the vessel manifest, or carrier records showing the container load date. For shipments through intermediary transshipment ports — common in trade routes from Southeast Asia, South Asia, and Europe — the relevant loading date is the date the merchandise was loaded onto the final ocean vessel leg destined for a U.S. port, not the date of loading onto an earlier feeder vessel.

For California importers receiving merchandise at the Ports of Los Angeles and Long Beach, the in-transit exception has the greatest practical value for shipments from relatively nearby origins with shorter transit times. Transpacific shipments from major East Asian ports — Shanghai, Shenzhen, Ningbo, Busan, Kaohsiung — typically require 12 to 21 days for the ocean crossing, meaning that merchandise loaded before February 24 from these origins would generally arrive at California ports between early and mid-March 2026, well within a reasonable entry processing window. Shipments from Southeast Asian origins such as Ho Chi Minh City, Bangkok, and Jakarta require somewhat longer transit times of 18 to 28 days, while shipments from South Asian ports such as Colombo and Chennai may require 25 to 35 days. European shipments via the Suez Canal route to the U.S. West Coast typically require 30 to 40 days. In each case, the importer must ensure that the merchandise was loaded before February 24 and must present adequate documentation of the loading date to CBP when filing the entry to claim the in-transit exception. Importers should work closely with their customs brokers to flag in-transit shipments at the entry filing stage and to include the supporting documentation in the entry package to avoid the assessment of Section 122 duties on exempt merchandise.

California Port Operations and the Section 122 Compliance Framework

The Ports of Los Angeles and Long Beach, together constituting the San Pedro Bay port complex, occupy a unique position in the Section 122 compliance landscape. As the nation's busiest container port complex, handling approximately 20 million TEUs of annual throughput, the San Pedro Bay ports are the point of entry for a disproportionate share of the merchandise subject to the Section 122 surcharge. The port complex serves as the primary gateway for imports from China, Japan, South Korea, Taiwan, Vietnam, Thailand, and other Asia-Pacific trading partners, and the volume of Section 122-dutiable merchandise entering through these ports during the 150-day surcharge period will likely exceed that of any other U.S. port district. This concentration of import volume means that compliance systems, customs broker capacity, and CBP processing resources at the San Pedro Bay ports must operate at peak efficiency to administer the surcharge without introducing delays or errors that could compound the cost burden on California importers.

The compliance framework for Section 122 at California ports requires coordination among multiple stakeholders. Customs brokers filing entries at the Los Angeles and Long Beach port districts must ensure that their automated filing systems correctly identify merchandise subject to the surcharge, apply the 15 percent rate under HTSUS 9903.03.01, correctly exclude merchandise qualifying for exemptions under HTSUS 9903.03.02 through 9903.03.11, and properly report the surcharge as a separate line item on the entry summary. Errors in surcharge application — whether through failure to assess the surcharge on dutiable merchandise or through incorrect assessment of the surcharge on exempt merchandise — create compliance exposure for both the importer and the broker. CBP has indicated that it will conduct focused reviews of Section 122 compliance at high-volume ports, including targeted audits of entries claiming exemptions and verification of in-transit exception claims. California importers should proactively review their entry data for the surcharge period, reconcile surcharge assessments against their understanding of product-level exemption eligibility, and address any discrepancies through Post-Summary Corrections before CBP identifies them through audit activity.

The California customs brokerage community has mobilized rapidly to address the operational demands of Section 122 compliance. Major brokerages operating at the San Pedro Bay ports have updated their classification databases to incorporate the new HTSUS Chapter 99 subheadings, developed automated screening tools to identify exemption-eligible merchandise, and deployed specialized compliance teams to handle the increased volume of surcharge-related inquiries from importer clients. Smaller brokerages serving niche import communities — such as the ethnic food importers in the greater Los Angeles area, the fashion and apparel importers in the downtown garment district, and the small electronics importers in the San Gabriel Valley — face particular challenges in rapidly adapting to the new surcharge regime while maintaining service levels for clients with limited compliance resources. For all California importers, the selection and engagement of a knowledgeable customs broker with demonstrated Section 122 compliance capability is an essential element of surcharge management during the 150-day period.

Practical Guidance: Building a Comprehensive Tariff Mitigation Strategy

California importers and exporters seeking to minimize their net Section 122 duty exposure should develop a comprehensive tariff mitigation strategy that integrates multiple tools rather than relying on any single mechanism. The optimal strategy for a given business depends on the nature and volume of its imports, whether it also exports, the product categories involved, the availability of bonded warehouse or FTZ infrastructure, and the financial capacity to defer inventory entry. The first step in any mitigation strategy is a thorough assessment of the business's Section 122 duty exposure: identifying all product categories subject to the surcharge, quantifying the expected import volume during the 150-day surcharge period, and calculating the total Section 122 duty cost absent any mitigation. This baseline assessment provides the foundation for evaluating the cost-benefit of each available mitigation tool.

For businesses that both import and export, duty drawback should be the cornerstone of the mitigation strategy. The 99 percent recovery rate for Section 122 duties makes drawback the most effective dollar-for-dollar mitigation tool available. The initial assessment should identify all import entries subject to the Section 122 surcharge and match them against corresponding export transactions — either completed exports or planned exports within the five-year drawback filing window. Manufacturing drawback under 19 U.S.C. Section 1313(a) or (b) should be pursued for imported inputs that are incorporated into manufactured exports, while unused merchandise drawback under Section 1313(j)(1) should be pursued for re-exported goods and substitution drawback under Section 1313(j)(2) for merchandise classifiable under the same 8-digit HTSUS subheading. Businesses that have not previously filed drawback claims will need to establish drawback compliance programs, including obtaining the necessary drawback rulings, implementing recordkeeping systems that satisfy CBP's documentation requirements, and engaging drawback specialists or customs counsel to prepare and file claims. The investment in drawback infrastructure is particularly justified for Section 122 duties because the 15 percent surcharge rate generates substantial recoverable amounts even on moderate import volumes.

For merchandise that cannot be matched to export transactions for drawback purposes, the bonded warehouse strategy offers the most direct path to surcharge avoidance. Importers should evaluate their inventory requirements to determine which merchandise can tolerate the deferral of U.S. market entry until after July 24, 2026, and route that merchandise to bonded warehouse storage rather than direct consumption entry. The economic analysis should compare the Section 122 duty savings against the costs of bonded warehouse storage, including monthly storage fees, handling charges, insurance costs on warehoused inventory, and the opportunity cost of capital invested in deferred inventory. For most categories of merchandise, particularly high-value goods such as electronics, machinery, and precision instruments, the 15 percent surcharge savings will substantially exceed the warehousing costs, making the strategy economically favorable. Importers should secure bonded warehouse space early in the surcharge period, as demand for bonded storage capacity in the Southern California market may increase as more businesses recognize the timing arbitrage opportunity.

FTZ users should carefully evaluate whether continued zone operations serve their interests during the Section 122 period, given the privileged foreign status lock-in requirement. For zone-based manufacturers that can benefit from the inverted tariff or that produce exempt finished products from dutiable components, FTZ operations may remain advantageous despite the surcharge lock-in. For zone users that primarily utilize FTZs for storage and distribution without manufacturing — a common model in the California logistics sector — the bonded warehouse alternative may offer superior surcharge mitigation due to the withdrawal-rate principle. The decision between FTZ and bonded warehouse routing should be made on a product-by-product and shipment-by-shipment basis, with the guidance of customs counsel who can evaluate the full tariff implications of each routing option. Additionally, all importers should ensure that their entries correctly claim available exemptions under HTSUS 9903.03.02 through 9903.03.11, as failure to claim an available exemption results in unnecessary surcharge payments that can be recovered only through the Post-Summary Correction process or, for liquidated entries, through CBP protests.

Conclusion: Maximizing Recovery and Minimizing Exposure

The Section 122 surcharge presents California importers and exporters with a defined 150-day period during which proactive tariff mitigation planning can yield substantial cost savings. CBP's confirmation that duty drawback is available for Section 122 duties creates a recovery pathway that can return up to 99 percent of surcharge costs to eligible exporters. Bonded warehouse strategies allow importers to defer entry until after the July 24, 2026, expiration, avoiding the surcharge entirely on warehoused merchandise. The in-transit exception protects goods that were on the water before February 24, 2026. And while FTZ operations are constrained by the privileged foreign status requirement, they retain value for manufacturing operations that can leverage inverted tariff benefits or exemption eligibility for finished products. Together, these tools provide a comprehensive framework for managing Section 122 exposure across the full spectrum of California trade operations.

The 150-day window demands urgency. Drawback claims require the establishment of compliance programs, the preparation of supporting documentation, and timely filing through the ACE system. Bonded warehouse strategies require early identification of eligible merchandise, procurement of warehouse space, and coordination with customs brokers on admission and withdrawal procedures. FTZ users must assess the privileged foreign status implications for each product category and decide whether to continue zone operations or redirect merchandise to bonded warehouse alternatives. In-transit claims require documentary proof of loading dates and coordination with ocean carriers and customs brokers. Each of these strategies involves procedural complexity and compliance risk that increases with delay. California businesses that begin mitigation planning immediately will be positioned to capture the maximum benefit from each available tool, while those that wait risk missing filing deadlines, encountering warehouse capacity constraints, and leaving recoverable duties unclaimed.

The landscape following July 24, 2026, remains uncertain. The administration may seek congressional authorization to extend the Section 122 surcharge, pursue alternative statutory authority for continued tariffs, or negotiate bilateral and multilateral trade arrangements that alter the tariff framework. Regardless of the post-July outcome, the duties paid during the 150-day surcharge period represent a fixed cost that can be reduced through the mitigation strategies described in this article. California importers and exporters should engage experienced customs counsel to evaluate their specific Section 122 exposure, design a tailored mitigation strategy incorporating drawback, bonded warehousing, FTZ planning, and exemption claiming, and execute that strategy within the compressed timeline of the surcharge period. Trembach Law Firm assists California businesses in navigating the full range of Section 122 tariff mitigation strategies and can be reached at (818) 514-7680 for a confidential consultation.

Frequently Asked Questions

What does substitution require after TFTEA?

For substitution unused merchandise drawback (19 U.S.C. § 1313(j)(2)) and substitution manufacturing drawback (§ 1313(b)), the substituted merchandise must be classifiable under the same 8-digit HTSUS subheading as the designated imported merchandise. That test replaced the former “commercially interchangeable” standard for unused merchandise and the “same kind and quality” standard for manufacturing. For substitution unused merchandise claims, where the 8-digit subheading begins with “other,” substitution is allowed only at the same 10-digit statistical reporting number whose description does not begin with “other.” Substitution unused claims also require that the claimant had possession of the substituted merchandise.

What is the deadline to file a duty drawback claim?

A complete drawback claim must be filed within 5 years after the date the merchandise designated as the basis for the claim was imported (19 U.S.C. § 1313(r)(1)). Claims not completed within that period are treated as abandoned. For unused merchandise drawback, the goods must also be exported or destroyed within the same 5-year period and before the claim is filed.

How is a drawback claim filed with CBP?

Electronically, in the Automated Commercial Environment through the Automated Broker Interface (ABI). CBP does not accept drawback claims through an ACE Portal account, directly at a CBP office, or on paper; a claimant can self-file, use a licensed customs broker, or use a service bureau. Since February 24, 2019, all claims are filed under the TFTEA rules in 19 C.F.R. Part 190.

Can drawback recover Section 301, Section 232, or IEEPA duties?

As of November 10, 2026: CBP treats Section 301 duties as eligible for drawback (CBP Drawback Trade Remedies FAQ, citing CSMS 18-000419). Section 232 steel, aluminum and copper duties carry a no-drawback clause in their proclamations, except that a proclamation published April 9, 2026 allows manufacturing drawback under § 1313(a) and (b), and no other drawback, on its Section 232 metals duties for articles meeting its conditions, for goods entered on or after April 6, 2026. The 2025 Section 232 automobile proclamation bars drawback. Executive Orders 14193, 14194 and 14195 (the IEEPA duties on Canada, Mexico and China) each state that no drawback is available. Antidumping and countervailing duties are never refundable as drawback (19 U.S.C. § 1677h). The current rules are summarized on our duty drawback attorney page.

Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.

Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301