PERSONAL INJURY | 2026-11-04
The "Your Work" Exclusion in California Construction-Defect Insurance: Why a CGL Policy Does Not Guarantee the Quality of a Contractor’s Own Work
A commercial general liability policy covers a contractor for damage its faulty work causes to other property — but a cluster of "business risk" exclusions pulls back coverage for the cost of fixing the contractor’s own defective work. Here is how the "your work," "your product," and related exclusions operate in California.
By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published
Contractors and the owners who hire them often assume that a commercial general liability (CGL) policy insures the quality of the contractor’s work. It does not. A CGL policy is a liability policy, not a performance bond or a warranty: it covers sums the insured becomes legally obligated to pay for
Construction-defect disputes are, at bottom, fights about who pays to fix a building — and insurance is usually where the parties look first. The commercial general liability (CGL) policy that nearly every California contractor carries is the central document, but it is widely misunderstood. A CGL policy does not promise that the contractor’s work will be good; it promises to pay, within limits, for property damage the contractor becomes legally liable for. The difference is enforced through a group of exclusions known as the business-risk exclusions, of which the "your work" exclusion is the most important in construction cases. Understanding these exclusions is the key to predicting whether a defect claim will be covered.
The CGL Insuring Agreement
A standard CGL policy agrees to pay those sums the insured becomes legally obligated to pay as damages because of "property damage" caused by an "occurrence," generally defined as an accident, including continuous or repeated exposure to substantially the same harmful conditions. The policy also imposes a broad duty to defend the insured against any suit seeking covered damages. In the construction context, the threshold questions are whether defective work is an "occurrence" and whether the resulting harm is "property damage" — and then, crucially, whether a business-risk exclusion applies to take the claim back out of coverage.
California generally treats unexpected, unintended damage flowing from defective construction as caused by an "occurrence," so that resulting damage to other property can fall within the insuring agreement. What the policy is not designed to cover is the contractor’s cost of making its own work conform to the contract. That cost is a business risk the contractor controls through its own competence, pricing, and warranties — not a fortuitous liability risk that insurance is meant to spread. The business-risk exclusions draw that line.
The Logic of the Business-Risk Exclusions
The business-risk doctrine reflects a basic allocation of risk. Insurance exists to protect against fortuitous losses — the accident the insured could not control. The quality of a contractor’s own work, by contrast, is within the contractor’s control; if CGL coverage paid to fix every defect, the policy would function as a performance guarantee, and premiums could never be priced to match. California courts have repeatedly explained that the business-risk exclusions exist to prevent the CGL policy from being converted into a warranty of the insured’s workmanship or products.
At the same time, the doctrine preserves coverage for the consequences of defective work on other property and persons. If a contractor’s faulty plumbing floods and ruins a homeowner’s floors and furnishings, the damage to the floors and furnishings is the kind of resulting harm the policy is designed to cover; the cost of redoing the defective plumbing itself is not. The exclusions are therefore drafted to remove the repair/replacement cost of the insured’s own work while leaving intact coverage for resulting damage to property beyond that work.
The "Your Work" Exclusion
The "your work" exclusion (exclusion (l) in the standard form) bars coverage for "property damage" to "your work" arising out of it or any part of it and included in the "products-completed operations hazard." In plain terms, once the contractor’s work is completed, the policy does not cover the cost of repairing damage to that work itself. If the defective stucco a contractor installed must be torn out and redone, that is damage to "your work" and is excluded. The exclusion targets the repair-and-replacement cost of the insured’s own defective workmanship.
The exclusion contains an important subcontractor exception. In the widely used form, the "your work" exclusion does not apply if the damaged work, or the work out of which the damage arises, was performed on the insured’s behalf by a subcontractor. This exception matters enormously to general contractors and developers, because much construction work is performed by subs. Where a sub’s defective work damages other parts of the project, the subcontractor exception can restore coverage that the bare exclusion would otherwise bar — a frequent battleground in California construction-defect coverage litigation.
The "Your Product" and "Impaired Property" Exclusions
Two companion exclusions complete the business-risk framework. The "your product" exclusion (exclusion (k)) bars coverage for property damage to the insured’s own product arising out of it — the product analog of the "your work" exclusion, relevant to manufacturers and suppliers. The "impaired property" exclusion (exclusion (m)) bars coverage for damage to "impaired property" or to property that has not been physically injured, where the impairment arises from a defect in the insured’s work or product or from a failure to perform a contract — addressing purely economic loss from a product or job that does not work as promised but has not physically harmed anything.
Read together, exclusions (k), (l), and (m) express a single idea: the CGL policy does not pay to make the insured’s work or product live up to the contract. It pays for physical injury to other property caused by the insured’s covered conduct. The exclusions are where many construction-defect coverage disputes are won or lost, because the characterization of the damage — as the insured’s own defective work versus resulting damage to other property — determines which side of the line the claim falls on.
F&H Construction v. ITT Hartford
California courts have applied these exclusions in the construction setting. In F&H Construction v. ITT Hartford Insurance Co. (2004) 118 Cal.App.4th 364, the Court of Appeal addressed the "your work" exclusion where a contractor’s defective work — there, the fabrication and installation of pile caps that failed — required repair. The court applied the business-risk exclusions to deny coverage for the cost of correcting the insured’s own defective work, reinforcing that a CGL policy does not insure the quality of the insured’s workmanship. The decision illustrates how California courts separate the uninsured cost of fixing the insured’s own work from any covered resulting damage.
F&H Construction sits within a broader body of California authority on business-risk exclusions. The courts have consistently distinguished between damage to the insured’s own work — excluded — and damage the defective work causes to other property — potentially covered. Because the standard-form language and its subcontractor exception are frequently revised by endorsement, the precise policy wording controls, and a careful reading of the particular policy is always required before predicting coverage.
The Duty to Defend and Potential Coverage
Even where the business-risk exclusions may ultimately bar indemnity, the insurer’s duty to defend can still be triggered. Under California law, the duty to defend is broader than the duty to indemnify and arises whenever the underlying suit presents the potential for coverage — that is, whenever the facts alleged or otherwise known to the insurer could support a covered claim. A construction-defect complaint that alleges resulting damage to property other than the insured’s own work may create a potential for coverage sufficient to require a defense, even if much of the claim ultimately proves excluded.
This gap between defense and indemnity is significant in construction-defect litigation, where complaints often lump together the cost of repairing defective work (likely excluded) and resulting damage to other components or property (potentially covered). An insurer that denies a defense based only on the business-risk exclusions takes a risk, because the presence of any potentially covered resulting damage can obligate it to defend the entire suit. For related coverage and bad-faith issues, see our personal injury and insurance practice.
Practical Guidance for Contractors and Owners
Several practical points follow. First, contractors should not treat a CGL policy as a substitute for doing the work correctly or for appropriate warranties and bonds; the policy will not pay to redo defective work. Second, general contractors and developers should pay close attention to the subcontractor exception in the "your work" exclusion and to the terms under which it is preserved or narrowed by endorsement, because it can be the difference between coverage and no coverage for sub-caused defects. Third, all parties should recognize that the characterization of the damage — own work versus other property — is often the decisive coverage question and should be analyzed early.
Owners pursuing defect claims and contractors tendering them should also mind the interaction with additional-insured coverage, the timing rules for continuous or progressive damage, and the duty-to-defend analysis. Construction-defect coverage is among the most litigated areas of California insurance law precisely because the business-risk exclusions require fine distinctions. A coverage analysis that reads the specific policy, maps each category of damage to the insuring agreement and each exclusion, and separates defense from indemnity gives the clearest picture of where a claim stands.
Progressive Damage: Timing and the Trigger of Coverage
Construction-defect damage rarely happens all at once. A defective building envelope may admit water for years before the resulting rot, mold, or structural harm becomes apparent, raising the question of which policy — across potentially several policy periods — is "triggered." California follows a continuous-injury trigger for progressive property damage, drawn from Montrose Chemical Corp. v. Admiral Insurance Co. (1995) 10 Cal.4th 645: coverage is triggered under every policy in effect from the time the damage first began through the time it became manifest or ceased, not merely the policy in force when the defect was discovered.
For construction defects, the continuous-trigger rule means a contractor or developer may have coverage under multiple successive CGL policies for a single course of progressive damage, each subject to its own limits, exclusions, and endorsements. It also means the "your work" exclusion must be analyzed policy-by-policy, because the standard form and its subcontractor exception can change from year to year. Allocating a progressive loss across triggered policies — and determining how much of the loss is excluded own-work repair versus covered resulting damage in each period — is one of the more complex tasks in construction-defect coverage, and it frequently drives the economics of these disputes. A careful coverage analysis maps the timeline of the damage against the sequence of policies before reaching any conclusion about the net recovery.
Additional-Insured Coverage and Risk Transfer
Construction projects allocate risk not only through each party’s own CGL policy but through additional-insured endorsements and contractual indemnity. A general contractor or developer is commonly named as an additional insured on its subcontractors’ policies, so that a claim arising from a sub’s work can be tendered to the sub’s insurer. This layered structure interacts with the business-risk exclusions in important ways: because the subcontractor exception to the "your work" exclusion can preserve coverage for sub-caused damage, and because additional-insured status can shift the defense and indemnity of a defect claim to the sub’s carrier, the combination often determines which insurer ultimately bears a construction-defect loss.
These risk-transfer tools are governed by their own rules. Additional-insured endorsements vary widely — some cover liability only for the named insured’s ongoing operations, others extend to completed operations — and California courts read the endorsement language closely to determine the scope of coverage. Contractual indemnity provisions in construction contracts are further constrained by statute, including limits on indemnity for a promisee’s own active negligence. Because a construction-defect claim can implicate the policies of the owner, the general contractor, and multiple subcontractors at once, resolving who pays requires analyzing each policy’s insuring agreement, each business-risk exclusion and its subcontractor exception, each additional-insured endorsement, and the governing indemnity agreements together. Approaching the problem one policy at a time, without the full map, is how parties miss available coverage — or assume coverage that is not there.
- California Personal Injury Lawyers
- The One-Year Suit-Limitation Clause in California Property Insurance: Delayed Discovery and Equitable Tolling After Prudential-LMI
- No "Comparative Bad Faith" in California: Why an Insurer Cannot Blame the Insured to Escape Its Own Bad Faith
- Uninsured Motorist Arbitration in California: How Insurance Code Section 11580.2 Decides Your UM Claim
Frequently Asked Questions
Does a CGL policy cover the cost of fixing a contractor’s defective work?
Generally no. The "your work" exclusion removes coverage for the cost of repairing or replacing the insured’s own completed defective work. A CGL policy is a liability policy, not a warranty of workmanship or a performance bond.
What does the CGL policy cover in a construction-defect case?
It can cover resulting "property damage" that the defective work causes to other property — for example, water damage to a homeowner’s floors from defective plumbing — subject to the policy’s terms and exclusions. The cost of redoing the defective work itself is excluded.
What are the business-risk exclusions?
They are a group of standard CGL exclusions — "your work" (l), "your product" (k), and "impaired property" (m) — that remove coverage for the cost of making the insured’s own work or product conform to the contract, while leaving coverage for physical injury to other property.
What is the subcontractor exception to the "your work" exclusion?
In the widely used form, the "your work" exclusion does not apply if the damaged work, or the work out of which the damage arose, was performed on the insured’s behalf by a subcontractor. This can restore coverage for a general contractor or developer when a sub’s defective work causes damage.
What did F&H Construction v. ITT Hartford hold?
In F&H Construction v. ITT Hartford Insurance Co. (2004) 118 Cal.App.4th 364, the California Court of Appeal applied the business-risk exclusions to deny coverage for the cost of correcting the insured’s own defective work, reinforcing that a CGL policy does not insure the quality of the insured’s workmanship.
Can an insurer owe a defense even if the exclusions bar indemnity?
Yes. California’s duty to defend is broader than the duty to indemnify and arises whenever the underlying suit presents a potential for coverage. If a defect complaint alleges resulting damage to other property, the insurer may have to defend even if much of the claim is ultimately excluded.
Is defective work itself an "occurrence"?
California generally treats unexpected, unintended damage resulting from defective construction as caused by an "occurrence," so that resulting damage to other property can fall within the insuring agreement. The business-risk exclusions then determine how much of the claim remains covered.
Should a contractor rely on CGL coverage instead of warranties or bonds?
No. Because the policy will not pay to redo defective work, contractors should manage workmanship risk through quality control, contractual warranties, and performance or completion bonds, and treat CGL coverage as protection against liability for resulting damage to others.
Speak With a California Construction-Insurance Attorney
Whether a construction-defect claim is covered usually turns on the business-risk exclusions and on whether resulting damage to other property triggers a defense. Because a single defect claim can implicate the policies of the owner, the general contractor, and several subcontractors across multiple policy periods, the analysis must read each insuring agreement, each business-risk exclusion and its subcontractor exception, and each additional-insured endorsement together before anyone can say whether a loss is covered. If you are a contractor, developer, or owner facing a defect dispute and a coverage question, Trembach Law Firm can analyze the policy and the claim. Call (213) 645-2246 to discuss your situation with a California insurance-coverage attorney.
This article is for general informational purposes and is not legal advice. Insurance coverage depends on the specific policy language and facts of each claim. Consult a qualified attorney about your particular policy and circumstances.
Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.
Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301