TRADE REMEDIES | 2026-11-03

The Injury Half of the Case: How the ITC Decides Material Injury in Antidumping and Countervailing Duty Investigations

Dumping or subsidies alone do not trigger duties. The International Trade Commission must also find that a U.S. industry is materially injured by reason of the imports — a separate inquiry that decides whether an order issues at all.

By Anatolii Trembach, Esq. (California State Bar No. 349304; LL.M., USC Gould School of Law; admitted to the U.S. Court of International Trade), Trembach Law Firm, APC · Published

Antidumping and countervailing duty cases are often described as if a single question — is the foreign producer dumping or subsidized — decides them. It does not. U.S. trade-remedy law requires two findings before duties can be imposed, made by two different agencies. The Department of Commerce dete

Trade-remedy law rests on a two-agency structure that surprises many parties their first time through it. The Department of Commerce calculates the unfair-trade margin — the dumping margin or the countervailable subsidy rate. The U.S. International Trade Commission makes the injury determination — whether a domestic industry producing the like product is materially injured, threatened with material injury, or materially retarded in its establishment, by reason of the subject imports. Both agencies must reach an affirmative result for an antidumping or countervailing duty order to issue. A large dumping margin paired with a negative injury finding produces no order at all. For importers and domestic producers alike, the injury phase before the ITC is therefore not a formality; it is frequently where the case is won or lost.

Two Agencies, Two Questions

The division of labor is set by statute. Commerce answers the unfair pricing question: are the goods sold in the United States at less than fair value (dumping), or do they benefit from countervailable government subsidies, and at what rate. The ITC answers the domestic injury question: is a United States industry being harmed by those imports in the ways the law recognizes. The two inquiries run on parallel tracks with their own records, hearings, and deadlines, and each agency makes a preliminary and a final determination.

The practical consequence is that a respondent can lose badly at Commerce and still prevail overall at the ITC, and a petitioner can win a high margin and still walk away with nothing if it cannot prove injury. Parties who focus all their energy on the margin calculation and neglect the injury case make a serious strategic error. The ITC proceeding has its own evidentiary demands — data on the domestic industry, pricing comparisons, and market analysis — that must be developed independently of the pricing fight at Commerce.

What "Material Injury" Means

The governing definition appears in 19 U.S.C. § 1677(7). "Material injury" means harm that is not inconsequential, immaterial, or unimportant. That deliberately modest threshold reflects a policy choice: the domestic industry need not be devastated to obtain relief, only harmed in a way that matters. But the harm must be real and supported by the record, not speculative, and it must be injury to the domestic industry producing the domestic like product — the product that is like, or most similar to, the imported merchandise under investigation.

Defining the domestic like product and the corresponding domestic industry is the first substantive step, and it can shape the entire case. The ITC examines factors such as physical characteristics, uses, interchangeability, channels of distribution, and customer and producer perceptions to decide whether products form one like product or several. A broad or narrow like-product definition changes which domestic producers count and what data defines the industry’s condition, so the parties often litigate this threshold question hard before the injury analysis even begins.

The Statutory Injury Factors

In deciding material injury, the ITC must consider three groups of factors set out in § 1677(7)(B) and (C). The first is the volume of subject imports — whether the volume, or any increase in it, is significant in absolute terms or relative to production or consumption in the United States. A surge in import volume, or a rising import share, supports an injury finding.

The second is the price effect of the subject imports. The ITC asks whether the imports have significantly undersold the domestic like product, and whether they have otherwise depressed domestic prices or suppressed price increases that otherwise would have occurred. Underselling and price depression or suppression are central to most injury cases, because they connect the imports directly to lost revenue and margins in the domestic industry.

The third is the impact of the subject imports on the domestic industry. Here the ITC evaluates a long list of economic indicators: output, sales, market share, profits and losses, productivity, return on investments, capacity utilization, cash flow, inventories, employment, wages, growth, ability to raise capital, and investment. No single factor is dispositive, and the ITC weighs them in the context of the particular industry and market. The statute makes clear that the presence or absence of any one factor is not necessarily controlling.

The "By Reason Of" Causation Requirement

Finding injury is not enough. The statute requires that the material injury be by reason of the subject imports — a causation requirement that has generated extensive litigation. The ITC must connect the injury it finds to the dumped or subsidized imports, not merely observe that the domestic industry is struggling. An industry can be injured by many things at once: a recession, rising input costs, non-subject imports, or its own inefficiency. The ITC must determine whether the subject imports are a cause of material injury, distinguishing their effects from those of other factors.

The Federal Circuit has addressed this causation analysis in decisions such as those stemming from the Bratsk Aluminium and Mittal Steel lines of cases, which examined how the Commission must account for other causes — particularly non-subject imports — when attributing injury to the subject merchandise. The upshot is that the ITC need not find the subject imports to be the sole or even the principal cause of injury, but it must reasonably explain how those imports caused material injury and must not attribute to them harm caused by other factors. This causation analysis is often the most contested part of a negative-injury defense.

Cumulation and Negligibility

Two statutory rules frequently determine the outcome. Cumulation, under § 1677(7)(G), generally requires the ITC to assess the volume and price effects of imports from all countries subject to investigation together, if the imports compete with each other and with the domestic like product and the petitions were filed on the same day. Cumulation can transform a case: imports from a single country might be too small to cause injury, but when the ITC adds together imports from several countries, the cumulated volume and price pressure can support an affirmative finding. Respondents from small-volume countries often fight cumulation precisely because it ties their fate to larger exporters.

Negligibility cuts the other way. Under the statute, imports from a subject country that are below a negligibility threshold — generally a small percentage of total imports of the merchandise — are disregarded, and the investigation as to that country is terminated. A respondent whose imports fall below the negligibility line may exit the case entirely. The interaction of cumulation and negligibility is intricate, and the thresholds and exceptions must be analyzed carefully for each subject country.

Threat of Material Injury and Material Retardation

The ITC can reach an affirmative result on any of three grounds. Beyond present material injury, it may find a threat of material injury under § 1677(7)(F), based on factors indicating that injury is imminent — such as a rapid increase in import penetration, substantial unused capacity in the exporting country, inventories, and the likely price effects of continued imports. A threat finding requires that the threatened injury be real and imminent, not merely conjectural or based on a remote possibility. The third ground, material retardation of the establishment of a domestic industry, applies in the narrow case of an industry still being established when the imports arrive.

Threat cases are analytically demanding because they are forward-looking. The ITC must base a threat determination on evidence that injury is likely to occur soon absent an order, weighing the capacity, inventory, and pricing evidence to project the trajectory of the market. For a respondent, attacking the imminence and likelihood of the projected injury is central; for a petitioner, building a concrete, evidence-based picture of impending harm is essential.

The Procedural Timeline

The injury inquiry proceeds in two stages that mirror Commerce’s. In the preliminary phase, early in the investigation, the ITC applies a low threshold — whether there is a reasonable indication of material injury or threat. A negative preliminary determination ends the entire investigation. If the preliminary determination is affirmative, the case proceeds, and after Commerce issues its final dumping or subsidy determination, the ITC conducts its final injury phase, including a hearing, and makes a final determination on a full record. The Commission’s procedures are set out in its regulations at 19 C.F.R. Part 207.

Both the preliminary and final phases require parties to submit extensive data and argument, respond to the Commission’s questionnaires, and participate in staff conferences and hearings. The deadlines are statutory and unforgiving. Parties that wait to build their injury case until the final phase are often too late; the record that matters is developed throughout, beginning with the questionnaire responses that supply the economic data the Commission relies on.

Why the Injury Phase Matters to California Businesses

For a California importer or foreign exporter, the ITC phase is an opportunity that the margin fight at Commerce does not provide: a chance to defeat the case entirely by showing that the domestic industry is not injured by reason of the imports, or that the respondent’s country is negligible, or that any injury flows from other causes. For a California domestic producer seeking relief, the injury phase is where the harm from unfair imports must be proven with data, not asserted. In both roles, the injury case demands early, disciplined development of economic evidence and a clear theory of causation.

Because injury is a separate, independent requirement, it rewards parties who treat it as its own case rather than an afterthought to the pricing dispute. The statutory factors, the cumulation and negligibility rules, the threat analysis, and the by-reason-of causation standard each offer avenues of argument that can change the result. Understanding them is essential to anyone whose business is affected by an antidumping or countervailing duty proceeding.

Related-Party and Captive-Production Issues

Two recurring complications can reshape the injury picture. The first is the related-party problem. Some domestic producers are themselves related to importers of the subject merchandise, or import the subject goods themselves. The statute allows the Commission, in appropriate circumstances, to exclude such related parties from the definition of the domestic industry when their inclusion would distort the injury analysis — for example, where a producer that also profits from importing the subject goods would skew the industry’s apparent condition. Deciding whether to exclude related parties can change which data defines the industry and, with it, the outcome.

The second is captive production. Where a significant share of the domestic like product is consumed internally by the producers themselves rather than sold on the merchant market, the statute directs the Commission to focus its analysis in a manner that accounts for that captive consumption. The captive-production provision affects how market-share and price data are read, because internal transfers do not behave like open-market sales. In industries with substantial captive consumption, this analysis can be decisive, and the parties contest vigorously how the Commission should treat the internally consumed volume in assessing injury.

Both issues illustrate a general truth about the injury phase: the definition of the industry and the market is as contested as the injury facts themselves. Before the Commission ever weighs volume, price, and impact, the parties fight over who counts as the domestic industry and which sales define the market, because those threshold definitions frame everything that follows.

Questionnaire Data and Confidential Treatment

The ITC’s injury determination rests heavily on data the Commission collects through detailed questionnaires sent to domestic producers, importers, and foreign producers. These questionnaires gather the figures that populate the injury analysis — production, shipments, inventories, employment, pricing of specific products, capacity, and financial results. The quality and completeness of a party’s questionnaire response often determines how persuasive its position is, because the Commission builds its findings on this record. A party that responds carelessly, or that cannot supply reliable data, weakens its own case regardless of the arguments its lawyers make.

Much of this data is business proprietary information, and the Commission handles it under an administrative protective order that allows authorized representatives to see confidential data while shielding it from public disclosure and from the parties themselves. Navigating the confidentiality rules — what can be said in a public brief, what must be bracketed as confidential, and how to argue from data one’s own client cannot see — is a specialized skill. The practical point for any business drawn into an ITC proceeding is that the data phase is the case: the numbers submitted early, through the questionnaires, shape the determination far more than the rhetoric at the hearing.

Frequently Asked Questions

Who decides material injury in an AD/CVD case?

The U.S. International Trade Commission decides injury, while the Department of Commerce decides the dumping margin or subsidy rate. Both agencies must reach affirmative determinations for an order to issue, so a negative ITC injury finding ends the case regardless of the margin.

What does "material injury" mean?

Under 19 U.S.C. § 1677(7), material injury is harm that is not inconsequential, immaterial, or unimportant. The threshold is modest, but the injury must be real, supported by the record, and suffered by the domestic industry producing the like product.

What factors does the ITC consider?

The ITC considers the volume of subject imports, their price effects (underselling, price depression, and price suppression), and their impact on the domestic industry across indicators such as output, market share, profits, employment, capacity utilization, and investment. No single factor is controlling.

What is the "by reason of" requirement?

The injury must be caused by the subject imports. The ITC must connect the harm to the dumped or subsidized imports and must not attribute to them injury caused by other factors, such as non-subject imports or a downturn. The subject imports need not be the sole cause, but the Commission must explain the causal link.

What is cumulation?

Cumulation generally requires the ITC to assess imports from all subject countries together when they compete with each other and the domestic product and the petitions were filed the same day. Cumulated imports can support an injury finding even where imports from one country alone would be too small.

What is negligibility?

Imports from a subject country below a statutory negligibility threshold — a small percentage of total imports of the merchandise — are disregarded, and the investigation as to that country is terminated. A respondent below the threshold may exit the case.

What is a threat of material injury?

Under § 1677(7)(F), the ITC may find that material injury is imminent even if not yet present, based on factors like rising import penetration, foreign unused capacity, inventories, and likely price effects. The threatened injury must be real and imminent, not speculative.

When does the ITC make its determinations?

The ITC makes a preliminary determination early in the case under a "reasonable indication" standard, and a final determination after Commerce’s final decision, following a hearing on a full record. A negative preliminary determination ends the entire investigation. The Commission’s procedures appear at 19 C.F.R. Part 207.

Related Guides

Speak With a California Trade Remedies Attorney

Whether your business is defending against an antidumping or countervailing duty petition or seeking relief from unfair imports, the injury phase before the ITC can decide the case. Trembach Law Firm counsels California importers, exporters, and domestic producers through the injury analysis, cumulation and negligibility questions, and causation defense. Call (213) 645-2246 to discuss your matter. Anatolii Trembach holds an LL.M. and is admitted to the California Bar.

This article is for general informational purposes only and does not constitute legal advice. Trade-remedy proceedings are complex and fact-specific; consult a qualified attorney about your particular investigation.

Contact Trembach Law Firm at (818) 514-7680 for a confidential consultation.

Trembach Law Firm | 27001 Agoura Road, Suite 350, Calabasas, CA 91301